Shelf addition to desk clamp
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I liked the clamp and wanted a small shelf to hold my glasses, so mashed-up an adapter to fit in the clamp
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 309
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I mashed up a disc to use as an insert for the clamp, and stuck a shelf on. (novice at Tinkercad - so excuse the mess I made). I added some small ridges around the disc for a tighter fit, and cut out the bracket so the shelf could fit closer to flush.
I have also included the .stl/.obj for the puck in case someone wants to put something else onto it.
Just used PLA - and printed it just off vertical (with snug supports) to keep the top/front clean. [.4 nozzle, .16 or .2 layer height, and with supports enabled]