Gridfinity Modular Modern Kitchen Trays
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Gridfinity based trays for kitchen utils (like cutlery, bottle opener, etc.). Source file included (OpenSCAD).
- Ocena
- 0 / 5
- Polubienia
- 174
- Pobrania
- 567
- Wydruki
- 1
- Wyświetlenia
- 2796
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
About
My second design for the great Gridfinity system (by Zack Freedman): a modular modern kitchen tray. Designed to organize your cutlery, but can of course be used for anything else as well.
There are files in mostly any useful size with 1, 2 and 4 compartments (all with Gridfinity height of 5). I also include the OpenSCAD (development snapshot) source file for other combinations/heights. Simply use the Customizer and create your own tray.
Print setting suggestions
- 0.2 mm
- 15% infill (Gyroid)
- Usually no support or brim required
Printfiles
I included a lot of STLs for easy printing. If you shouldn't be able to find the one you need for your scenario, I included the OpenSCAD source file where you can use the Customizer to simply create any combination of size and compartments you'd like.
Notes
- In case you have long knifes that are longer than your printing area, you can simply use a tray that's big enough and cut it on the gridfinity marks (see e.g. the big knifes tray in the printout image on the right is 8x2 and cut into a 6x2 and a 2x2).