Gridfinity Modular Modern Kitchen Trays
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Gridfinity based trays for kitchen utils (like cutlery, bottle opener, etc.). Source file included (OpenSCAD).
- Rating
- 0 / 5
- Likes
- 174
- Downloads
- 567
- Makes
- 1
- Views
- 2,796
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial
About
My second design for the great Gridfinity system (by Zack Freedman): a modular modern kitchen tray. Designed to organize your cutlery, but can of course be used for anything else as well.
There are files in mostly any useful size with 1, 2 and 4 compartments (all with Gridfinity height of 5). I also include the OpenSCAD (development snapshot) source file for other combinations/heights. Simply use the Customizer and create your own tray.
Print setting suggestions
- 0.2 mm
- 15% infill (Gyroid)
- Usually no support or brim required
Printfiles
I included a lot of STLs for easy printing. If you shouldn't be able to find the one you need for your scenario, I included the OpenSCAD source file where you can use the Customizer to simply create any combination of size and compartments you'd like.
Notes
- In case you have long knifes that are longer than your printing area, you can simply use a tray that's big enough and cut it on the gridfinity marks (see e.g. the big knifes tray in the printout image on the right is 8x2 and cut into a 6x2 and a 2x2).