Ozito Battery to Dewalt Tools adaptor
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Use Ozito cordless tool batteries with Dewalt tool skins
- Ocena
- 5 / 5
- Polubienia
- 14
- Pobrania
- 131
- Wydruki
- 0
- Wyświetlenia
- 542
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
Cordless tool battery adapter.
Ozito Battery to Dewalt skin tools
Extra hardware
- spade connectors
- wire
- fuse terminals
- M3 x10mm bolt & Hex nut
- Resistors, 2K,3K,10K ohm
Prep spade connectors like this, flatten out the shoulders if you can
Assembly should be self explanatory, reach out if you need clarification. Resistors installed as follows,
2K - 2-5
3K - 1-2
10K - 4-5
I jam them in the cavity under the tab, and I hot glue them in once tested.
I've seen other designs where only a 12K is used, but I didn't test that, be good to know if that works. (https://www.thingiverse.com/thing:4703651)
Here's a video using that arrangement of resistors with another brand battery.
If you like this model, please throw me a like. Designing the models is time, filament and coffee consuming. If you want to support my work buy me a coffee (PayPal). Thanks!