Insinkerator garbage disposal drain cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
drain cover for an Insinkerator branded garbage disposal ~86 mm in ID (may fit others)
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 10
- Wydruki
- 1
- Wyświetlenia
- 153
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
Motivation
My sink is very small & the faucet aims at the drain, so filling water bottles requires an attended hand to steady the water bottle over the drain
with this 3DP part, a sufficiently wide bottle (about the size of a 1 L Nalgene) can stand on its own
Design
intended to be a loose fit in an ~86 mm ID hole, which is drafted
a rubber “blocker” stock part prevents errant items from falling in, including the 3DP part
3DP part designed to stand above the top of the drain because sinks are sloped toward the drain
this way, a bottle can stand roughly level
Rev 2
84 mm OD instead of an 86 mm OD for a looser fit
otherwise unchanged & untested as of 2025-01-24