Splitted Filament buffer upgrade for Samla 22L Drybox for smaller printers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This version is divided into 2 parts so that it can be printed on smaller beds and then attached with 2mm zip ties
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 78
- Wydruki
- 0
- Wyświetlenia
- 910
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
After building my Samla 22L Dombi3D Drybox, I ran into the problem that I could not print the separators for the filament spools because the original design did not fit in my printer, so I took on the task of remixing the original model to split it in two parts which could be printed on smaller beds and easy to join.
This version corresponds to the Prusament model of Dombi3D design and is divided into two parts.
You must print 2x Part1 and 2x Part2 per spool and then join them tightly with small zip ties using the holes.
Enjoy!