lightweigt filament passthrough with detachable tube fitting for storage
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
took the idea from @motocoder and changed it so it would suit my needs better.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 42
- Wydruki
- 0
- Wyświetlenia
- 161
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
took the idea from motocoder and changed it so it would suit my needs better.
objectives:
make use of pneumatic fittings for the PFTE tube on the outside
press fitting for PTFE tube on the inside
small, leightweight and easy to print & mount
easy operation for my daily use
Handling:
I use the drybox for daily printig. From the drybox I directly attach the PTFE tube to the printer. When changing filament I need to store the rest of filament also in the drybox. So I wanted a passthrough where it is very easy to insert the rest of the filament and the PTFE tube.
Inside the drybox the rest of the filament is routed with a PTFE tube behind the filament spool, so it is out of the way.
there are two passthrough files versions:
One is for pneumatic fittings where the PTFE tube can you through all the was.
The other one is for pneumatic fittings where there is an internal endstop for the PTFE tube.
from the inside the PTFE tube is fed into the hole and it will guide the filament without scratching or touching anything.
I also made a tool to tighten the bolt.
Print with 3 walls and 3 top/bottom layers. Resolution should be ok with 0,2mm
no support!
my version prints with 5g of filament
10 sets take 2h 30min
the original design by motocoder needs 9g of filament
10 sets take 4h 30min to print