1 / 1
Best Chili Award, "The Golden Ladle" — zdjęcie 1

Best Chili Award, "The Golden Ladle"

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A trophy awarded to the best chili for a contest.

Ocena
0 / 5
Polubienia
4
Pobrania
67
Wydruki
0
Wyświetlenia
382
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

All models will need to be rotated to be placed on a face as they are tipped when imported. 

Use a small layer height for the bottom of the ladle to avoid a stepped look on the slanted edge.

Rotate the bottom of the ladle so the tall side faces the back of your printer and change your seam location to “rear”. There is no good place to put the seam so it looks the least out of place in line with the screws rather than in a random location.

Use (2) M3x8 bolts and (2) M3 nuts to attach the handle.

Use (1) M3x12 bolt to attach the ladle to the base. If you do not want to use a bolt there, you will need to add a solid filler within your slicer and then glue on the base.

Tagi