Best Chili Award, "The Golden Ladle"
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A trophy awarded to the best chili for a contest.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 67
- Makes
- 0
- Views
- 382
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Art & Designs
- License
- Creative Commons — Attribution
All models will need to be rotated to be placed on a face as they are tipped when imported.
Use a small layer height for the bottom of the ladle to avoid a stepped look on the slanted edge.
Rotate the bottom of the ladle so the tall side faces the back of your printer and change your seam location to “rear”. There is no good place to put the seam so it looks the least out of place in line with the screws rather than in a random location.
Use (2) M3x8 bolts and (2) M3 nuts to attach the handle.
Use (1) M3x12 bolt to attach the ladle to the base. If you do not want to use a bolt there, you will need to add a solid filler within your slicer and then glue on the base.