1 / 2
RODECaster Duo Legs Stand
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Free up space on your desk! Only 17g <3
- Ocena
- 4 / 5
- Polubienia
- 9
- Pobrania
- 65
- Wydruki
- 1
- Wyświetlenia
- 903
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (0)Kolekcje (13)Powiązane
Surprisingly sturdy, this set of legs elevates your RØDECaster Duo approximately 10mm off your desk, positioning it at a comfortable 45-degree angle while freeing up valuable desk space.
Printing Instructions:
- Quantity: Print two of each leg (a total of four legs required).
- Printing Orientation: Print in place on the narrow edge; no supports needed.
- Recommended Settings:
- Perimeters: Use 3 perimeters for optimal wall strength.
- Top & Bottom Layers: Use 5 layers for durability.
Assembly:
- Placement:
- Short legs are positioned at the front.
- Long legs are positioned at the back.
- Designed for use with 4x M4 bolts, which screw through the printed legs into the VESA mount holes located on the back of the RØDECaster Duo.
Additional Notes:
- Due to the device's angle, the front headphone port becomes unusable as the headphone jack will run into your desk.
- This design's primary purpose is to free up desk space while maintaining easy access to the controls and ports of your RØDECaster Duo.