1 / 2
RODECaster Duo Legs Stand
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Free up space on your desk! Only 17g <3
- Rating
- 4 / 5
- Likes
- 9
- Downloads
- 65
- Makes
- 1
- Views
- 903
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Audio
- License
- Creative Commons — Attribution — Noncommercial
Surprisingly sturdy, this set of legs elevates your RØDECaster Duo approximately 10mm off your desk, positioning it at a comfortable 45-degree angle while freeing up valuable desk space.
Printing Instructions:
- Quantity: Print two of each leg (a total of four legs required).
- Printing Orientation: Print in place on the narrow edge; no supports needed.
- Recommended Settings:
- Perimeters: Use 3 perimeters for optimal wall strength.
- Top & Bottom Layers: Use 5 layers for durability.
Assembly:
- Placement:
- Short legs are positioned at the front.
- Long legs are positioned at the back.
- Designed for use with 4x M4 bolts, which screw through the printed legs into the VESA mount holes located on the back of the RØDECaster Duo.
Additional Notes:
- Due to the device's angle, the front headphone port becomes unusable as the headphone jack will run into your desk.
- This design's primary purpose is to free up desk space while maintaining easy access to the controls and ports of your RØDECaster Duo.