Mini Lab - Mini Network Rack
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mini network rack I created to organize my equipment
- Ocena
- 0 / 5
- Polubienia
- 113
- Pobrania
- 239
- Wydruki
- 0
- Wyświetlenia
- 4992
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other 3D Objects for Learning
- Licencja
- Creative Commons — Public Domain
This rack is a creation of my own design to organize all of my home network equipment as well as some of my ubuntu servers I use for self hosting.
it has standard U spacing for a network rack however it does not match the width of the commercially available 10" rack accessories
Final dimensions are:
9 5/8" wide
11 1/4" tall
Depth is dependent on the length the threaded rod is cut.
Tools Needed
Basic screwdrivers, pliers, allen keys
Hack saw for cutting threaded rod to length
Soldering Iron for installed threaded inserts
Hardware needed:
3d Printer - I printed everything on my modiefied ender 5 with a stock bed size of 235x235. some pieces I had to print at a 45 degree angle due to their size, everything prints w/out supports. I printed all of the mounts for my devices facing down.
Filament - I printed these in PETG with a 0.6 nozzle, .32 layer height, 3 walls, 50% infill
Rack Rails of your prefered length (Purchase 2 for a total of 4 rails) - https://a.co/d/fZDThfB
Disclaimer: I designed the corner pieces around the holes in the side of the rack rails. I'm not certain if they will work with any other brand)
4 Equal length pieces of 5/16" threaded rod. Length determines the depth of the rack
5/16" nuts - Qty: 16
M3 Threaded inserts - Qty: 12
M3x12 screws - Qty: 12
M5x12 screws - Qty: 16
M5 nuts - Qty: 16
Equipment in my rack:
Keystone Couplers for Patch Panel: https://a.co/d/a3Am1Ej
TP-Link ER605 Router: https://a.co/d/1lIMSu5
TP-Link TL-SG108 Switch: https://a.co/d/igBqLLo