Bowden Guide with 360° Joint Block-off/Blanking Plate
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Blanking plate to replace the Bowden Guide with 360° Joint when it is no longer needed.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 124
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- GNU General Public License v3.0
I was originally using the bowden guide as a top-center feed for my V2 as it allowed for the shortest PTFE tube to the hotend but with a new MMU setup I no longer needed it. Instead of getting a new sheet to replace the one I cut I instead modified the original file to act as a block-off or blanking plate to go in place of the original ball joint and reusing the other hardware. This way if I ever chose to go back it would be as easy as replacing the blanking plate.
I included the original CAD file exported as a STEP since I do not use Fusion360.