AR Extension modular handle for KUNGS ice scraper
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Extension, handle for KUNGS ice scraper v2.73
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 34
- Wydruki
- 0
- Wyświetlenia
- 144
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
Extension, handle for KUNGS ice scraper.
This is an improved version of the Kungs handle, it has the ability to mount the blade on both sides, which gives 6 available blades on one scraper.
- stronger version of the handle
- modular design
- 6 available blades on one scraper!
Status of this project:
- v2.7 - 2025-01-26 add handle - printed (fit perfect) & test pass.
- v2.73 - 2025-02-04 More adjustments – better handle fitting and more strength.
My print settings:
- nozzle diameter: 0.4mm, 0.6mm
- infill: 15% gyroid
- wall: 5
- material: recommended ASA, ABS
Disclaimer:
I try to release the most optimized model possible, however remember - use this thing at your own risk.
Feel free to share and any modification
and
If my free design is useful for you, please leave a comment, picture for my motivation on the project page, I am waiting for you! You can also buy me a coffee through paypal if you can and if you want. https://www.paypal.com/paypalme/ArkadiuszRatajczyk
Thank you very much for every word and help in the development of my inventions. Thanks.
Peace and enjoy.