118 modeli
Simple stand for the ZimaBoard that can accommodate two 2.5" drives based on the rack mounted module I have created. It is available in two variant: Original ( zimaboard-hdd-stand.stl ): which can accommodate up to two 9.5 mm high 2.5"…
Wydruk około 3,00 €–3,66 € nettoWstępna wycena jednego wariantu
Simple stand for the ZimaBoard that can accommodate two 3.5" drives based on the ZimaBoard Dual HDD Stand created by orax . Assembly You need unscrew and remove the lower plastic plate from your ZimaBoard and reuse the screw to mount it…
Wydruk około 4,14 €–5,05 € nettoWstępna wycena jednego wariantu
Modular 1U Rackmount for ZimaBoards , to be co-located with Raspberry Pi and OpenUPS2. The design provides 5 “slots” to make up the 19" rack, which can be made from a combination of single and double-width holders which are secured…
Wydruk około 1,08 €–1,32 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I wanted to use some other PCIe Cards with my ZimaBoard Single Board Computer, but in order to use any card, you need to remove the mounting bracket. As there isn't a standard for where the screw holes will be on a PCIe card for the…
Wydruk około 1,86 €–2,27 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Horizontal 1U Rackmount for ZimaBoard with support for between zero and two, 7mm high SSD. If installing 2 x 7mm this will take the overall height over the 1U height (44.5mm) to around 51mm. The rack mounting holes are designed for M6…
Wydruk około 1,23 €–1,50 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Please note this design should be considered a BETA , I'm still making some tweaks for the following: Improve all hangers to make latching less stiff Improvements to PCIe hanger. Modular 3U Rackmount for ZimaBoards , to be co-located with…
Wydruk około 2,94 €–3,59 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Two segments module for the DAP Audio MP-1 10 segments 2U rack frame to mount a ZimaBoard and up to two 2.5" drive (max height: 9.5mm). This module is part of a larger collection of modules known as the MP-1 Rack: 2U Modular 19" Racking…
Wydruk około 3,72 €–4,55 € nettoWstępna wycena jednego wariantu
I wanted to mount my Zimaboard and an extra 2.5Gbps NIC as I plan to use this as a pfSense router. I've provided 2 versions, one which uses brass inserts to secure the NIC onto, the other which provides smaller holes for M3 bolts to self…
Wydruk około 2,05 €–2,50 € nettoWstępna wycena dla PETGMateriał u źródła: PET
After creating some more complex designs, I've created a simple VESA 100x100 mount for the ZimaBoard and a VESA 200x200 mount which also supports 100mm mounting. The VESA100-200 mount is too big to print on my Prusa Mini+. The ZimaBoard…
Wydruk około 1,63 €–1,99 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This little tool helps to understand and to train the binary to decimal conversion. How to handle it: You simly have to adjust a binary code of max. 10 bits in the upper row by flipping the covers up or down. After that just add the…
2 Bay HDD Stand that fits the ZimaBoard and 3.5" drives or 2.5" with adapters I used this adapter for 2.5" SSD's: https://www.thingiverse.com/thing:5423854 The model needs supports for printing.
This design will allow you to mount a Zimaboard microcomputer to a wall and also store a single SSD. I used a Samsung SSD as my basis for the design but extended the length to 100mm for longer enclosures. Total SSD size available is 100mm…
Description This storage mounting system allows you to install SSDs and HDDs to your Zimaboard while keeping all the SATA cables hidden and allowing different configurations. You can install a single or double SSD or HDD to a mix between…
ZimaBoard 2 Run Plex, Pi-hole, Proxmox, or even Minecraft - 24/7, cool and silent. Native SATA & PCIe - no hats, no hassles. Dual 2.5G Ethernet built-in. Run what works for you - ZimaOS, TrueNAS, Proxmox, Debian, pfSense… Small, hackable,…
The 3D-printed stand for the ZimaBoard is a versatile and practical accessory designed to enhance storage capabilities. With slots to accommodate two 2.5-inch HDDs, it offers ample space for expanding storage capacity. Additionally, the…
Simple dock for the ZimaBoard that can accommodate 2 2.5" drive. https://www.zimaboard.com/
I’m truly grateful to Zima for this opportunity. It’s been a pleasure to design an accessory for the ZimaBoard 2—specifically, a 10-inch server-style enclosure. I use this setup as the central hub for my smart home running Home Assistant,…
This case allows storing two 3.5" hard disks vertically with an intake fan. A grill at the back allows the air to exit the case. The Zimaboard bolts to the side of the case where small cutouts are found to connect to the HDDs inside. The…
A cover to fit over the Zimaboard PCI connector.
This case supports two 3.5" hard drives mounted vertically, with an intake fan for cooling. I used a Noctua NF-P12 PWM fan. On the exterior side of the fan, there is an AKASA Fan Filter GRM-120-30 dust filter, while on the interior side…
Bottom mount for two 2.5" drives for the zimaboard with honeycomb face for ventilation. Might add HC to the sides if feasible.
I designed a case to install an 80mm fan and an SSD. With active cooling, the temperature can be reduced significantly. The air flows out from under the entire underside to the rear through the cooling fins. The Cable you need to connect…
I wanted to move my proxmox cluster from a power hungry R610 to a HA Zima Board Cluster. While there are some sacrifices being made, with that, I have a lower power bill…..sooooo theres that. This is my solution to rack mounting 4 boards…
This has been designed as part of IceWhale's 3D design challenge . Please consider liking the submission here . Each voter receives a $5 coupon. Enhance the functionality and capacity of your 2 bay HDD stand with these add-ons designed to…
This is a crude modification of two Printables.com projects: - ZimaBoard Wall Mount w/SSD: https://www.printables.com/model/178994-zimaboard-wall-mount-wssd And - ZimaBoard Wall Mount for Generic PCIe cards:…
This is the ZimaBoard with PCIe Seat and Ledge for the Amfeltec PCI Squid Carrier Board which has 8 Mini PCI Card Slots for WiFi adapters. This is the model now being used in my WarDrive rig which can be seen here:…
ZimaBoard base enclosure for 7mm thick 2.5" SSD. Replaces existing base, uses stock screws. I have printed this in PLA and PETG with success. Supports may be needed for the base and can be popped out by inserting a pin punch or drill bit…
搭建ZimaBoard集群是主流场景。我们专门为ZimaBoard Cluster定制了一个支架！
I bought the Zimaboard 2 after I was happy with my Zimaboard 1 and wanted it mounted to my rack. Most of the design I found was only for a 10inch rack and not 19inch so why not try it myself. I was happy with my base design so I tried so…
Basic remix of the popular DIN rail clip (made by marauder156 on thingiverse) to mount the ZimaBoard. Works with original ZimaBoard M3 x 12mm screws if you remove the bottom plate. Otherwise you'll need M3 x 14-16mm screws if you plan on…
intended for laying on a surface, it is necessary to replace M3 screws with M3 cylindrical head - thread length 20mm printing recommendations: - PETG - 3 vertical perimeters - print without supports - infill 20%
Custom slot loaded (top down friction fit) for the Zimablade SBC module for use in the microRACK homelab setup. This has an additional slot for mounting a SSD or 2.5" hard drive. REQUIRED: You will need to print the microRACK track to…
NASTIER (Network-Attached Storage; Tiny; Inexpensive; Easy; Redundant) A ZimaBlade-based micro NAS with redundant Raid 1 storage and full server capabilities. Full instructions on my website here:…
ZimaBoard 2 — AT Style Case This project is a retro-inspired case designed as a tribute to the classic AT desktop PC cases , reimagined for the modern ZimaBoard 2 . The goal was to combine nostalgic design with modern hardware…
ZimaBlade Powerful Single‑Board Server for DIY Labs & NAS Flexible PCIe Expansion Silent & Rugged Design Modular NAS & Storage Capability Supports Your OS of Choice Highly Rated by the Community If you'd like to learn more about…
1 Bay HDD Stand that fits the ZimaBlade and one 3.5" drives or two 2.5" with adapter. I used this adapter for 2.5" SSD's: https://www.thingiverse.com/thing:5423854 The model needs supports for printing.
Custom slot loaded (top down friction fit) for the Zimablade SBC module for use in the microRACK homelab setup. The module has 2 VERSIONS depending on which ports you want accessible on the front. REQUIRED: You will need to print the…
A space-saving option to have your ZimaBlade on its side rather than flat against your worktop. Allows space for heatsinks or a fan to be attached to the blade and orientation for the heat to escape. Includes space/a cradle for a single…
I have not been particularly happy with the Zimaboard mounting options out there until finding @MartinRowan's excellent modular 1U system . This remix was done to suit my specific needs, but I feel that some may be of use & worth sharing.…
Project: This is my remix of the 10 inch Rack 1 U HDD cages from https://makerworld.com/en/@OloDeepdelver. I added a mounting option for a ZimaBlade to act as my NAS as my entire Homelab is based on a 19 inch rack. This was printed in…
This fan grill was made to be easily printed laying flat, no supports needed. It is fixed onto the back of the ZimaCube using 5x 8x3mm magnets (my magnets I ordered actually measured 8x2.6mm). The magnets should be pressed fit, at least…
Remixed from my hex hole remix of the original dual HDD stand by orax, reduced height for two slim SSDs.
1U Zimaboard 10 inch mount with passthroughs for keystones.
Tool-less NAS enclosure designed specifically for the ZimaBoard 2 and two Seagate IronWolf 3.5 inch 12TB HDD. Can fit the fan for the ZimaBoard no problem, however you lose access to the PCIE 3.0 slot. HDD dimensions: 147mm x 102mm x 26mm…
A compatible blade for my rack mount which holds a zimaboard.
🧠 Zimaboard 2 NAS Case (Fully 3D Printable) A compact, fully 3D printable NAS enclosure designed specifically for the Zimaboard 2 project. Video overview and build process can be found via the link . ✨ Features 🖨 Fully 3D printable design…
This is an evolution of my previous mod . I created a mount for a ZimaBoard with a dual-port NIC and two SSDs attached to install a firewall with PFsense or OPNsense. Because the network ports of the MikroTik HAP are on the back, it was…
I bought a Zimaboard to use as my Home Assistant server and got sick of having it on mydesk. So I designed a no nonsense mount for the mini Skadis board I have mounted on the wall next to my desk. I printed it with PLA, 15% infill.
Case for Zimaboard and 2 SSD You need: 4x M3x10mm to hold the SSD's 4x M2.5x12mm hold the top part 4 M2.5 brass inserts
ZimaBoard Dual SATA 6Gbps ports + PCIe x4. Dual Gigabit Ethernet built-in. Your OS, your choice — Linux, OpenWrt, pfSense, Android, LibreELEC, and more. Home media server, firewall, personal cloud. If you'd like to learn more about…
Wall mount for ZIMA BOARD2 and two 2.5" HDD drives. Only screws are to fix holder on the wall, all other does not need any screw, just put ZimaBoard in a slot, from a top HDD drives also. All cables and connectors are free to be plugged -…
The Middle Atlantic 2U FK2 is close but not quite the European DAP Audio 2U. Took goobag's bracket, and spliced in orax's zimmaboard in TinkerCAD
This print is build in one part and holds a Zimaboard (version 1) a 60 mm FAN, PCIe SATA card and a 5.25 inch SSD cage. To build it you need to screw all the parts in the correct order on the printed "holder" The FAN (screwed in from…
This mount is for the new Zimaboard 2. The new units have side mount screws instead of screwing in from the bottom. I also added a front plate to better support sagging due to the heavier weight of the new models. There are 2 downloads…
2 Bay HDD Stand that fits the ZimaBoard 2 and 3.5" drives or 2.5" with adapters. The model needs supports for printing and best would be to print it vertically oriented.
This is mount that lets you add an 80mm fan to your ZimaBoard2 dual HDD caddy
A merging of bigbluealien's and LvL_Dani's designs to fit a zimaboard on CB4D's Microlab. The tray is 1u and there is a little over 10mm of clearance from the back panel. Design 1 is centered but limits PCIe expansion compatibility,…
Absolutely awesome work from MartinRowan . I wanted to put my fiber optic modem on a sled. Used the provided blank sled .step file and made this sled. I'm including the first iteration I made and the final iteration. Initial: Full sled,…
I really liked @MartinRowan's Modular ZimaBoard mounting solution , but being in the US, getting non-freedom-unit threaded rods can be pricey. On the other hand, ¼"-20 Threaded Rods are about $2 for a 2ft section at the big-box stores of…
Zimaboard modular rack mount with space for two 2.5" SSD's requires 2u rails or DAP system, recommended to print with ASA https://www.printables.com/@LvL_Dani_470947/collections/2036642
These sleds make use of the bottom mounting channel on the router and requires 2 screws (Philips Pan Head screw #6-32×3/16 according to Teltonika) for a secure mount. (This will mark your router as the screws tap into the channel) The…
Added din rail clips to the original model, if an isolator sheed is needed for the SSD disk it can be found there.
The addition of a mount point and support bracket allows you to stack the pcie card below the drives, taking up less horizontal space. One could argue that the extension cable may impact performance, so be forewarned.
This custom mount allows you to securely attach your ZimaBoard to an IKEA Skådis pegboard. It’s designed to be both practical and visually appealing—perfect for makers who want to keep their setup clean while showing off their home lab.…
For ZimaBoard
This model is NOT pristine. I am not a designer, but I wanted a handle that would work for this file: https://www.printables.com/model/803295-zimaboard-modular-storage-enclosure Because I am not a designer, I'm using tinkercad to piece…
Since both my OPNsense and Home Assistant servers run on a ZimaBoard, and I really like the Galaxy Server Rack, I decided to design this adapter as my first project. I printed it using the 0.20mm, SUNLU - PETG profile without any supports.
These are the CAD models for the Zimaboard enclosure, featured on the Magmabow youtube channel. Manufacturing details Bezel: CNCed 6061 Aluminum, powder coated white Body: CNCed 6061 Aluminum, powder coated white Back plate: CNCed 6061…
The ideal support for your under-desk organiser grid or cable management system.
V1: First Remix of the original Model. Works great and looked good when test fitting everything on my desk - but when I installed it in my rack and started cabling everything, I noticed that some cable management options would have been…
Thank you to @heroeant both for posting the .step files and also for the well thought out and well made design! I wanted to modify this model so that I could use two hdd's via the sata Y adapter available from the store for the zimaboard,…
This is a set of 2 trays to put a ZimaBoard2 and a 120mm fan on the https://www.printables.com/model/1173696-3d-printable-rack-10-inch-and-6-inch/related I have my ZimaBoard2 on the bottom and a 120mm Noctua Fan on top, blowing air to…
ZimaBoard base enclosure for 7mm thick 2.5" SSD. Replaces existing base, uses stock screws and mounts to every Ikea Skadis board. I printed the base out of PETG on the small side with tree structures for the overhang and while it takes a…
Zima Board 2 mount for IKEA SKÅDIS system. Requires 2 (or 2 is probably enough) x Skadis T-Clip System - Low Profile Flush Mount Clips If anyone interested here is the onshape link.
(Fast) Schraubenloses NAS-Gehäuse für das ZimaBlade. Steckbares Gehäuse für das ZimaBlade und zwei 2,5“ SSDs/HDDs. Gedruckt in PETG. 8 Schrauben M3 x 5mm für die SSD/HDD-Trays werden benötig.
Remixed from my hex hole remix of the original dual HDD stand by orax, reduced height for two slim SSDs.
ZimaBoard 2 Run Plex, Pi-hole, Proxmox, or even Minecraft - 24/7, cool and silent. Native SATA & PCIe - no hats, no hassles. Dual 2.5G Ethernet built-in. Run what works for you - ZimaOS, TrueNAS, Proxmox, Debian, pfSense… Small, hackable,…
This mount is for the new Zimaboard 2. The new units have side mount screws instead of screwing in from the bottom. I also added a front plate to better support sagging due to the heavier weight of the new models. There are 2 downloads…
Hello there :) i am a ZimaCube backer and fost some time i was thinking to upgrade the top cover and side panels for the ZimaCube Pro Creator, i made from scrach the first version , but the dust was a pain in the *SS :D every few months…
ZimaBlade Powerful Single‑Board Server for DIY Labs & NAS Flexible PCIe Expansion Silent & Rugged Design Modular NAS & Storage Capability Supports Your OS of Choice Highly Rated by the Community If you'd like to learn more about…
ZimaBoard Dual SATA 6Gbps ports + PCIe x4. Dual Gigabit Ethernet built-in. Your OS, your choice — Linux, OpenWrt, pfSense, Android, LibreELEC, and more. Home media server, firewall, personal cloud. If you'd like to learn more about…
ZimaCube Up to 9 bays of open, modular storage 1GB/s transfer speeds with NVMe PCIe expansion for 10GbE and beyond ZimaOS out of the box — shares, backups, media, sorted Designed for lightning-speed, grounded-local storage, co-work If…
These are the CAD models for the Zimaboard enclosure, featured on the Magmabow youtube channel. Manufacturing details Bezel: CNCed 6061 Aluminum, powder coated white Body: CNCed 6061 Aluminum, powder coated white Back plate: CNCed 6061…
This is a set of 2 trays to put a ZimaBoard2 and a 120mm fan on the https://www.printables.com/model/1173696-3d-printable-rack-10-inch-and-6-inch/related I have my ZimaBoard2 on the bottom and a 120mm Noctua Fan on top, blowing air to…
ZimaBoard 2 — AT Style Case This project is a retro-inspired case designed as a tribute to the classic AT desktop PC cases , reimagined for the modern ZimaBoard 2 . The goal was to combine nostalgic design with modern hardware…
Description This storage mounting system allows you to install SSDs and HDDs to your Zimaboard while keeping all the SATA cables hidden and allowing different configurations. You can install a single or double SSD or HDD to a mix between…
This is a relatively simple mount for a ZimaBlade, its designed for the blade to be slid on the holder and be bolted to the back of a monitor, this may be used where the ZimaBlade is used as a media player, or digital signage. The PCIe…
Einfaches Hilfsmittel zum Umrechnen von Binär auf Dezimalzahlen. Die Teile fügt man einfach mit einem Stück Filament zusammen.
Simple stand for ZimaBlade which allows the board to be placed on the flat surface with storage hanging above the computer. I've designed it this way because I suck at cable management and I've mounted power/Ethernet/miniDP cables too…
Notes on printing: Orientation so that the flat side (inside) lies on the print bed. Optional possibility to glue in TPU feet. Minimal support required. Assembly: Screw the printed parts to the two hard disks using 8x M3x8 screws. Then…
A modified version of the original model with a holding bracket for a small single fan GPU. Repurposed for Zimablade.
Click to Read About 6.5 inch and Rack Frame 6.5 inch Rack Mount Collection rack mount design by use 3D Model Resources for IceWhale Products as reference and i dont have device to test this print, use at your own risk Rack mount use M3…
remix from 6.5 inch rack ZimaBlade by request, more info read in remix source i dont have device to test this print, use at your own risk If you enjoy my work, please consider support at link in profile.
This is a 4-piece perforated lid for the ZimaCube. There are MUCH better designs out there, but they're single pieces. Are they printable on my Ender-3 V3 SE? Sure, but not without custom supports. I wanted something that was just easy to…
This is my customized 10-inch rack mount for the ZimaBlade. I kept the original black metal heatsink module from the ZimaBlade. Since my home network runs at 2.5G, I added a PCIe network card. Because I also added a 2.5” hard drive mount,…
I made this for my ZimaCube - Pro , if you want you can print it, does now have support for fan , it fits perfectly.if you want you can print it, does now have support for fan, it fits perfectly. UPDATE: added a version for dust mesh see…
Really love this model. Printed mine in PETG on a core one “vertically” with the face down for a nice textured finish from the build plate at the front of the rack. Added a couple of 12mm holes to the front for power buttons (see pics) I…
Insert pro deskovou hru Zima mrtvých. Vytvořil jsem jej, aby do něj pasovaly obalené karty. Insert se skládá ze čtyř boxíků na karty, dvou velkých boxů na figurky (jeden pro hrdiny, jeden pro zombíky) a dále dvou boxíků, které se dávají…
3D modely žetonů do hry Zima mrtvých. Jsou zde celkem 3 modely barikád, dále žeton zranění a žeton omrzliny. V mém insertu pro hru je můžete umístit do volných slotů. PODPĚRY: Ne ------- 3D models of tokens for the game Winter of the…
Hello there :) i am a ZimaCube backer and fost some time i was thinking to upgrade the top cover and side panels for the ZimaCube Pro Creator, i made from scrach the first version , but the dust was a pain in the *SS :D every few months…
