1 / 6
ZimaBoard2 and Fan trays for 10" rack — zdjęcie 1
1 / 6

ZimaBoard2 and Fan trays for 10" rack

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a set of 2 trays for a ZimaBoard2 and a 120mm fan for the 10" rack from Maurício Pessoa (@Mauke).

Ocena
0 / 5
Polubienia
1
Pobrania
6
Wydruki
0
Wyświetlenia
138
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Computers
Licencja
Creative Commons — Attribution

This is a set of 2 trays to put a ZimaBoard2 and a 120mm fan on the https://www.printables.com/model/1173696-3d-printable-rack-10-inch-and-6-inch/related

I have my ZimaBoard2 on the bottom and a 120mm Noctua Fan on top, blowing air to cool it. I did some soldering to uso the ZimaBoard2 fan control and set a nice curve on the BIOS. It is pretty silent and keep around 50ºC most of the time with short peaks reaching high 60s under load.

I have split each tray in different parts to take advantage of best printing orientation and also help print it on smaller printers. 

I printed mine with PET-CF for higher temperature resistance but you can do that with PETG as it has almost the same glass transition temperature with annealing.

I printed using 0.2mm layer heights, 0.4mm layer width, 20% infill. with 4 perimeters, 5 bottoms and 5 top layers. I made it thicker to avoid deformation because of temperature.

Hardware:

You will need 4 M8 screws and nuts, to fix the trays in the rack.

You will need 9 M3 screws and thread insert, to fix bottom and front parts of the trays.

Tagi