zimaboard case, no heatset inserts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
remixed because theres nothing wrong with zipties and usb to sata adapters for your homelab!
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 126
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
Thank you to @heroeant both for posting the .step files and also for the well thought out and well made design!
I wanted to modify this model so that I could use two hdd's via the sata Y adapter available from the store for the zimaboard, I also wanted to access my systems boot SSD using a USB to SATA adapter plugged into the front of the zimaboard. I'm well aware that this is a bad way to do things but I kinda don't care.
I also found that I did not have enough M3 heat-set inserts on hand to put this together so I removed the spots for heat-set inserts and added holes to instead use 4.5mm wide zip ties to hold the whole case together. Again I know this is not ideal but It did work quite well for me.
Lastly I added vent holes to the ssd-hdd cable cover. I don't really know if this will help with cooling in any meaningful way but it was fun and it MAY help so seemed like a decent idea.