zimaboard case, no heatset inserts
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
remixed because theres nothing wrong with zipties and usb to sata adapters for your homelab!
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 11
- Makes
- 0
- Views
- 126
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution
Thank you to @heroeant both for posting the .step files and also for the well thought out and well made design!
I wanted to modify this model so that I could use two hdd's via the sata Y adapter available from the store for the zimaboard, I also wanted to access my systems boot SSD using a USB to SATA adapter plugged into the front of the zimaboard. I'm well aware that this is a bad way to do things but I kinda don't care.
I also found that I did not have enough M3 heat-set inserts on hand to put this together so I removed the spots for heat-set inserts and added holes to instead use 4.5mm wide zip ties to hold the whole case together. Again I know this is not ideal but It did work quite well for me.
Lastly I added vent holes to the ssd-hdd cable cover. I don't really know if this will help with cooling in any meaningful way but it was fun and it MAY help so seemed like a decent idea.