MP-1 Rack: ZimaBoard 2U Rack Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
ZimaBoard mount for the DAP Audio MP-1 2U modular racking system (part of the MP-1 Rack collection).
- Ocena
- 5 / 5
- Polubienia
- 33
- Pobrania
- 271
- Wydruki
- 1
- Wyświetlenia
- 4256
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Share Alike
Two segments module for the DAP Audio MP-1 10 segments 2U rack frame to mount a ZimaBoard and up to two 2.5" drive (max height: 9.5mm).
This module is part of a larger collection of modules known as the MP-1 Rack: 2U Modular 19" Racking System collection, which leverages the DAP Audio MP-1 frame to provide custom panel to mount multiple electronic devices such as a Raspberry Pi or some keystone modules. Each module in the collection should be compatible with others built by the community.
You can read more about why I built this collection in this article.
A free standing stand-alone version of this module is also available if you just want a simple stand for your ZimaBoard.
Assembly
You need unscrew and remove the lower plastic plate from your ZimaBoard and reuse the screw to mount it to the module as it has no mounting holes exposed.
Standard hard drive mounting screws can be used to attach your HDD / SDD in the drive slots. The ones coming from the official HDD bracket work perfectly here.
Printing
The model should be printed with the front section on the build-plate (see the 3mf file) and can be printed relatively quickly and cleanly using 0.3mm layer height in PETG or PLA (PLA might not be the best in warmer environment).
- Raft: no
- Supports: no
- Layer Height: 0.3mm
- Infill: 20%
Changelog
- V1.0 (2022-06-20): Initial release
- V1.0 (2023-04-16): Updated cover picture