1 / 1
ZimaBlade 10 inch rack NAS remix with power/reset switches
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Added holes to the front panel for push botton power and reset switches
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 73
- Wydruki
- 0
- Wyświetlenia
- 1220
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (38)Powiązane
Really love this model. Printed mine in PETG on a core one “vertically” with the face down for a nice textured finish from the build plate at the front of the rack. Added a couple of 12mm holes to the front for power buttons (see pics)
I had to add m2.5 brass inserts for my card to the holes at the size they were at were too big to self tap the screws that came with the card (using bigger screws wouldn’t have fit through the PCB.