1 / 7
16x16 LED Matrix case with D1 Mini slot and support/hanging options — zdjęcie 1
1 / 7

16x16 LED Matrix case with D1 Mini slot and support/hanging options

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Matrix case with D1 Mini slot no screws or glues required. Could be hanged or standing

Ocena
0 / 5
Polubienia
2
Pobrania
19
Wydruki
0
Wyświetlenia
173
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution — Noncommercial

This was inspired by  other similar projects with the idea of having these options:

  • No screws or glues
  • Make both hanging or standing
  • Provide dedicated place for D1 Mini (that goes well with WLED project!) and USB cable cut out
  • Minimise plastic use 
  • No support

The diffusor is only few layer thin (so that it is transparent) so make sure the bed is clean otherwise you'll see it on the screen. 

Design with 0.4mm nozzle in mind.

Back plates are bendable, which is handy when you put those in. More than one backplate can be installed if you need sturdiness or better support for the matrix itself. 

Matrix is WS2811B flexi board type.

Tagi