1 / 7
16x16 LED Matrix case with D1 Mini slot and support/hanging options
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Matrix case with D1 Mini slot no screws or glues required. Could be hanged or standing
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 19
- Makes
- 0
- Views
- 173
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
This was inspired by other similar projects with the idea of having these options:
- No screws or glues
- Make both hanging or standing
- Provide dedicated place for D1 Mini (that goes well with WLED project!) and USB cable cut out
- Minimise plastic use
- No support
The diffusor is only few layer thin (so that it is transparent) so make sure the bed is clean otherwise you'll see it on the screen.
Design with 0.4mm nozzle in mind.
Back plates are bendable, which is handy when you put those in. More than one backplate can be installed if you need sturdiness or better support for the matrix itself.
Matrix is WS2811B flexi board type.