1 / 1
Prusa XL Filament Roller [SUMO Enclosure Remix] — zdjęcie 1

Prusa XL Filament Roller [SUMO Enclosure Remix]

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A remix of bomtarnes's fantastic filament roller model that works with the SUMO enclosure.

Ocena
5 / 5
Polubienia
13
Pobrania
39
Wydruki
1
Wyświetlenia
328
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Remix of bomtarnes's Prusa XL Filament Roller that works with the SUMO enclosure. 

I removed the foot that slots into the extrusion because the SUMO enclosure panels cover the 3030 aluminum extrusion. I also shortened the bolt carrier so that the bolt had enough length to extend through the enclosure panels and thread into the scrapnel nut. I also extended the base to 90mm to match the base on the stock SUMO “filament holder offset” model.

This is the longer version of the roller body, so you'll also need to print a longer roller from bomtarnes's model.

A standard M5x85mm bolt works with this model.

Tagi