Prusa XL Filament Roller [SUMO Enclosure Remix]
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A remix of bomtarnes's fantastic filament roller model that works with the SUMO enclosure.
- Rating
- 5 / 5
- Likes
- 13
- Downloads
- 39
- Makes
- 1
- Views
- 328
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Remix of bomtarnes's Prusa XL Filament Roller that works with the SUMO enclosure.
I removed the foot that slots into the extrusion because the SUMO enclosure panels cover the 3030 aluminum extrusion. I also shortened the bolt carrier so that the bolt had enough length to extend through the enclosure panels and thread into the scrapnel nut. I also extended the base to 90mm to match the base on the stock SUMO “filament holder offset” model.
This is the longer version of the roller body, so you'll also need to print a longer roller from bomtarnes's model.
A standard M5x85mm bolt works with this model.