1 / 6
Šuplíky stohovatelné nebo pod poličku / Drawers stackable or under the shelf — zdjęcie 1
1 / 6

Šuplíky stohovatelné nebo pod poličku / Drawers stackable or under the shelf

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Šuplíky stohovatelné nebo pod poličku ve dvou variantách / Drawers stackable or under the shelf in two variants

Ocena
4 / 5
Polubienia
38
Pobrania
109
Wydruki
1
Wyświetlenia
1159
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Office
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Pokud stahujete prosím o like. Děkuji

 

CZ: Toto jsou stohovatelné šuplíky - původně navržené pod polici, v rozích je místo na 3mm závitovou tyč pro zvýšení nostnosti a jako spojovací prvek pokud by jste je chtěli skládat na sebe - z tohoto důvodu jsou k dispozici dva modely základního těla. Model označený jako spodní nemá průchozí otvory ve dnu na závitovou tyč, model označený jako průchozí má otvory i dole takže tyč protáhnete zkrz celé tělo.

Pro snadnější montáž a pro výrazné zpevnění pokud budete chtít poličky použít jako nosný prvek (sám mám na nich postavené 2 monitory a notebook + 1,5m polici z masivu) je zde horní díl - do něj pasují pouzdra na závit (není nutné je instalovat) pro 3 mm tyče.  pokud je dáte usnadní to montáž. a zároveň jsou tam pripravené otvory pro připevnění do spodku poličky. Tento díl zabrání celému tělu police se jakkoliv kroutit pod zátěží a v kombinaci s závitovými tyčemi v rozích výrazně zvětší pevnost výrobku.

 

EN: These are stackable drawers - originally designed under the shelf, there is space in the corners for a 3mm threaded rod to increase the load capacity and as a connecting element if you would like to stack them - for this reason, there are two base body models. The model marked as bottom does not have through holes in the bottom of the threaded rod, the model marked as through has holes at the bottom so you can stretch the rod through the whole body.

For easier assembly and for significant reinforcement if you want to use the shelves as a supporting element (I have 2 monitors and a laptop + 1.5 m solid wood shelf built on them) there is an upper part - threaded cases fit into it (it is not necessary to install them) for 3 mm bars. if you give them it will facilitate the assembly. and at the same time there are holes for attachment to the bottom of the shelf. This part prevents the entire body of the shelf from twisting under load in any way and, in combination with the threaded rods in the corners, significantly increases the strength of the product.

Tagi