Cap for 500/333 ml soda Can
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Cap for 500/333 ml soda can
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 66
- Wydruki
- 0
- Wyświetlenia
- 249
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Test Models
- Licencja
- Creative Commons — Attribution — Noncommercial
Just a top cap for a can it fits 500 ml sodas it also fits the 333 ml sodas such as pepsi max.
i printedet it on my prusa mini + with normal pla mine srunk 0.7 mm a can is 54 mm on the top so i printedet this with a inner cirkel on 54.7 mm and the outer is 4 mm thicker so my model is 58.7 mm in the x and y axes you can print it and if it too small or too big you can always ajust the (58.7 mm) so it fits.
I had the plan that u could put the cap on a can and cut out the top part of the can and the could store stuff in it but you are always allowed to remix it and make it a bit mor useful, i use it as a top for my can light thing look at picture 3.