1 / 4
🍺 Bottle/can holder (up to 3 bottles on one stand)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This holder can hold up to 3 bottles/cans of beer or anything suitable, designed for fridge. 3 variants.
- Ocena
- 5 / 5
- Polubienia
- 38
- Pobrania
- 393
- Wydruki
- 5
- Wyświetlenia
- 1337
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (11)Wydruki i komentarze (Wydruki: 5) (Komentarze: 6)Remiksy (0)Kolekcje (72)Powiązane
Info:
- for 3 bottles/cans
- upper position is not that high, so it can fit also lower celing drawer (and use just 2 bottles)
- stackable side by side
- 3 variants (see below)
- the upper position can hold even larger bottle
- if you have generally larger bottles, just scale it :)
Dimensions:
- total height: 15,7 cm
- width: 7,5 cm (normal variant), or 8,1 cm (robust variant)
- depth: 10,4 cm
- bottle hole diameter: 7,2 cm
3 variants:
- normal variant
- less width (7,5 cm)
- PLA, 7,5% infill
- ✅ easy print, no problem with 200% speed (so print time ~ 3h 30m)
- ✅ 0,3 mm DRAFT is good enough
- 🔝sufficient enough & saves the most space in fridge
- robust variant
- more width (8,1 cm)
- PLA, 7,5% infill
- ✅ also easy print, 200% speed (so print time ~ 3h 30m)
- ✅ 0,3 mm DRAFT
- robust variant with HONEYCOMB
- stylish honeycombish ;)
- width the same as robust (8,1 cm)
- PLA, 5% infill
- ❗ possibly problematic print, recommending lower than 100% speed. So print time is really high, but little bit less filament consumption even on 0.2 QUALITY mode
- note: I have printed hexa holes on normal variant + those hexa holes were bigger (this version is on the photo, and is not here mentioned)
- meaning that hexa structure was really thin and it caused some problems with print ➡ so I have created robust variant for that and decreased hexa holes size, so the material structure is thicker, and it should be now less problematic
- note: I have printed hexa holes on normal variant + those hexa holes were bigger (this version is on the photo, and is not here mentioned)
- 0,2 mm QUALITY
Print instructions:
- see 3mf files
- print more of them, they can stand side by side 🍻