1 / 4
🍺 Bottle/can holder (up to 3 bottles on one stand)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This holder can hold up to 3 bottles/cans of beer or anything suitable, designed for fridge. 3 variants.
- Rating
- 5 / 5
- Likes
- 38
- Downloads
- 393
- Makes
- 5
- Views
- 1,334
- Reviews
- 5
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial
Info:
- for 3 bottles/cans
- upper position is not that high, so it can fit also lower celing drawer (and use just 2 bottles)
- stackable side by side
- 3 variants (see below)
- the upper position can hold even larger bottle
- if you have generally larger bottles, just scale it :)
Dimensions:
- total height: 15,7 cm
- width: 7,5 cm (normal variant), or 8,1 cm (robust variant)
- depth: 10,4 cm
- bottle hole diameter: 7,2 cm
3 variants:
- normal variant
- less width (7,5 cm)
- PLA, 7,5% infill
- ✅ easy print, no problem with 200% speed (so print time ~ 3h 30m)
- ✅ 0,3 mm DRAFT is good enough
- 🔝sufficient enough & saves the most space in fridge
- robust variant
- more width (8,1 cm)
- PLA, 7,5% infill
- ✅ also easy print, 200% speed (so print time ~ 3h 30m)
- ✅ 0,3 mm DRAFT
- robust variant with HONEYCOMB
- stylish honeycombish ;)
- width the same as robust (8,1 cm)
- PLA, 5% infill
- ❗ possibly problematic print, recommending lower than 100% speed. So print time is really high, but little bit less filament consumption even on 0.2 QUALITY mode
- note: I have printed hexa holes on normal variant + those hexa holes were bigger (this version is on the photo, and is not here mentioned)
- meaning that hexa structure was really thin and it caused some problems with print ➡ so I have created robust variant for that and decreased hexa holes size, so the material structure is thicker, and it should be now less problematic
- note: I have printed hexa holes on normal variant + those hexa holes were bigger (this version is on the photo, and is not here mentioned)
- 0,2 mm QUALITY
Print instructions:
- see 3mf files
- print more of them, they can stand side by side 🍻