Counting matching models…
I designed a wallmounted cupholder. It can handle glasses, bottles oder cups up to 89mm. (inner diameter 90mm) The wall has a hight of 62mm, the holes for the screws are 5mm. At the bottom I made some holes as draining for rainwater. The…
Bottle holder for inside a tractor, excavator or something else. holds 2 250ml bottles with a with of 50mm. suctioncups used bottles used
Hi, I designed this bottleholder for my bike. If you like it show it wit a like ;) you can also tip me with a dolla or
A way to keep your drink on the fence without the risk of it falling over and leaking. It reliably holds all kinds of bottles on the fence. Thanks to the long handle, the holder can also be held comfortably in the hand with the bottle…
This is a bottleholder with the autodarts logo on it. You can screw the back part into the wall/backboard and slide in the holder. detach it by pushing it upwards. one model is with a logo slightly moved outwards and the otherone is an…
Hi, I designed this bottleholder for my bike. If you like it show it wit a like ;) you can also tip me with a dolla or so :D Category: 3D Printing
This is a mount for your mobilephone in the mini cooper f54, f56, bottleholder. Ther is a small and a wider version online. 1.1.19 Added a version with cableholder and hole for a power cable Category: Mobile Phone
🍺 Can Holder for Backpack Chest Strap Don't want to juggle your beer anymore while conquering mountains or biking to the lake? 🏞🚵 No problem – this clever 3D-printed can and bottle holder is your new best friend on your chest strap! 😎 🔧…
Durchmesser der Becher: 76,2 mm / 3 in Höhe der Becher: 98 mm / 3,86 in Breite des Stegs (Oberseite): 40,1 mm / 1,58 in max. Breite der Aussparung unten am Steg: 34 mm / 1,34 in Abstand der Kabelbinderöffnungen oben: 40 mm / 1,58 in…
This is a car trash can for drink holder with a diameter of 82 mm. The total height is 120 mm. The second file conatins the same model, but with diameter only 70 mm. (The height remains the same.) There is a 2mm hole for the axle in the…
I adjusted the Originalmodell V2 so it fits on a Bambu P1/X1
Holder for Milkbottles ID 88 mm No PLA! ASA or ABS for heatresistant Brim and support needed If you need the opposite corner, mirror the stl along the x - axis
I designed a wallmounted cupholder. It can handle glasses, bottles oder cups up to 89mm. (inner diameter 90mm) The wall has a hight of 62mm, the holes for the screws are 5mm. At the bottom I made some holes as draining for rainwater. The…
ENGLISH: These are two versions of the 4x can or bottle holder - same design, different size. 1) The "XS" version is optimized especially for 0.5l cans or plastic bottles, which have up to 66mm in diameter. It was designed very tightly…
Printed with carbon fiber reinforced PETG Works with bottles up to 68 mm in diameter and attachment mit 22 mm diameter. The example on the picture is with a small Bluetoothbox.
needed bottleholders for my Skadis with 48mm inner diameter, i don't like supports so i made one with 2 external hooks, tight fit you'll need to print 2 pieces of the universal hook
A little addon for recumbent trikes. It's mounted on a HPVelotechnik FS26, but should be rather universal. It can hold several bottles and you can mount on it what you want. I designed an extra pilon, to mount my speedometer on, but there…
Holder tray for 10 Ancefine Precision Tip Glue Applicator Bottle,30ml found on Amazon, here: Link: http://a.co/j6GWGRh Great for holding precision bottloes of CA accelerator, solvents, and thin materials for prop making or just general 3D…
Wir haben hier ein Fahrrad-Flaschenhalter für große Wasserflaschen mit einem Durchmesser von Ø82-84mm. Damit passen die meisten auf dem freien Markt erhältlichen 1l Flaschen in den Halter. Dazu habe ich noch die IPT Dateien hinterlegt…
This holder is for a 100ml bottle with 47,5mm diameter For mounting use the Twist-T-clip-system: https://www.printables.com/model/256896-skadis-t-clip-system
bottleholder for IKEA Skadis using CSD_Salzburg's Universal Hook https://www.thingiverse.com/thing:2853261
I recently bought a WalkingPad X21 treadmill which is a great product, but the minimalistic design lacks a good place to put a water bottle. I made this attachment to fit on the side of the handrail so it doesn't interfere with the LCD…
The bottle holder can be easily mounted to your table or enclosure with a 4mm Spax countersunk screw. You can differentiate between a left and a right version. Depending on the version you can download the appropriate files. Left marked…
This is my Bottleholder. It is designed for beer bottles and other 0.5 L bottles. Its made to clip it on 25 mm thick woodplanks of furniture. Its my first project, so dont judge me to hard. Print Settings Printer Brand: Prusa Printer:…
I designed this Bottleholder for ISEKI lawn-mower-bulldogs to hold my beer while mowing ;-) I've mounted it on the left side in front of the seat-belt-buckle with the snap-fit. You can also press it on the sheet using bolts. I highly…
Update V2 - 20240425 - Update to use also for Honeycomb Storage Wall ---------------------------------------------------------------------------------------- Bauteile / Parts: 1x Flaschenhalter_Bottleholder_D81_5 2x Skadis Doppelhaken /…
He intentado hacer el botellero mas simple posible, siendo apilable. Lo he probado con cuatro alturas y sin problema.
You can use this bottle holder to simply hang your bottles anywhere. Be it on a shelf, on a bar or simply on your table. Valuable space can be saved because you can now simply hang the bottles on the edge and do not have to put them on…
Halterung für drei elipsenförmige Fläschchen für die Skadis-Wand, mit 2 Haken zum Einklinken. Innenmass ist 26x36 mm, Wandstärke 2mm. Skadis wall bracket for 3 elliptical bottles, with 2 hooks to snap into place. Internal dimensions 26x36…
I needed something to hold my 0.5L bottles so i made these. Printed in PETG, i used prusaslicer to make the modifier and changed to infill etc.
Es gibt unzählige Flaschenhalter, hier ist meine Interpretation und Vorstellung eines Flaschenhalters! Die Besonderheit liegt darin, dass sich die Haltung flexibel an unterschiedliche Flaschen anpasst und gleichzeitig der Flaschendeckel…
Auf unserem Gartentisch waren die Getränke vor unserer Tochter nicht mehr sicher, darum habe ich mir diese Halter gedruckt um sie an unserem Holzgartenzaun einzuhängen. Darin passen die Gläser oder Flaschen und sind geschützt. Ich habe…
Dies ist ein Flaschenhalter für Fahrräder. Print Settings Rafts: No Supports: Yes **Resolution:** 0,25 Infill: 50 % **Filament:** any PETG Category: 3D Printing
Bottle holder for inside a tractor, excavator or something else. holds 2 250ml bottles with a with of 50mm. suctioncups used bottles used
