Parametric T-Track Bin
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Basic bin for use in T-tracks such as those in Benchdogs.co.uk Ultra MFT Workstation or Festool MFT/3 table
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 174
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Basic bin for use in T-tracks such as those in Benchdogs.co.uk Ultra MFT Workstation or Festool MFT/3 table.
Any T-nut compatible with your T-track should work, however the bins were designed for use with this aligning T-nut.
For the Festool MFT/3, use the T-Nut from Festool's accessories such as their hose mount.
Provided models use M5 bolts. If using a Benchdogs.co.uk workstation, bolts 16mm to 20mm should work. Test fit before tightening all the way down to ensure the bolt does not damage T-track.
Edit bin parameters in FreeCAD by changing values in the Parameters spreadsheet found in T-Track Bin.FCStd.
NOTE: So far this has only been tested for use with the Benchdogs.co.uk workstation.