Parametric T-Track Bin
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Basic bin for use in T-tracks such as those in Benchdogs.co.uk Ultra MFT Workstation or Festool MFT/3 table
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 23
- Makes
- 0
- Views
- 173
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Basic bin for use in T-tracks such as those in Benchdogs.co.uk Ultra MFT Workstation or Festool MFT/3 table.
Any T-nut compatible with your T-track should work, however the bins were designed for use with this aligning T-nut.
For the Festool MFT/3, use the T-Nut from Festool's accessories such as their hose mount.
Provided models use M5 bolts. If using a Benchdogs.co.uk workstation, bolts 16mm to 20mm should work. Test fit before tightening all the way down to ensure the bolt does not damage T-track.
Edit bin parameters in FreeCAD by changing values in the Parameters spreadsheet found in T-Track Bin.FCStd.
NOTE: So far this has only been tested for use with the Benchdogs.co.uk workstation.