Spherical Parallel Manipulator (No hardware required)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Reverse engineered MakeBreakRepair's model from youtube video. Making it 3D printer friendly.
- Ocena
- 4,846 / 5
- Polubienia
- 963
- Pobrania
- 2853
- Wydruki
- 33
- Wyświetlenia
- 22 695
- Oceny
- 26
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Engineering
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Credit where credit is due.
I made this model based on a short video from MakeBreakRepair's youtube channel about it.
*NOT MY VIDEO*
Thought it was a cool neat weekend project.
Managed to get it no hardware required by using print in place hinges and friction fits.
The tolerances may vary, I tuned it for my printer (Prusa MK3S+).
The only part that need support is the top Pin, but it's very minimal.
The rotation point is 75mm from the top part. (I used a needle head in my case, but anything at that focus point should work)
I'll wait for feedback to improve the model!