P
Printables
Wrist Watch Docking Station
Keeps the twisting charging cable in place. printed in PETG with standard settings, lh = 0,2 infill 8% updated to V2 (Fusion file and *stl file) Tightened the cable slot
Wyniki wyszukiwania: wrist
Liczymy pasujące modele…
P
Printables
Wrist watch strap retainer clip
v2: wider top to prevent accidental unfastening This clip is both small and large enough not to fall out of the watch holes during everyday use. Very simple flat printing with normal supports is pure pleasure. Enjoy! If you would like to…
P
Printables
magnetic wrist band connector
Wristband connector. Use magnets 3mm diameter, 2mm height. press magnet into the hole, keep polarity of the magnets in mind. I used PETg for best results. Additional notes I'm interested in your feedback to improve my stuff! So give me…
P
Printables
Single-Right-Hand Joy-Con Adapter (+ Status Light, Wristband and Tactile Marking)
This is an adaptation to the design of One-Handed Joycon Controller Adapter (Right Hand version) by Richie Rein, which is also a remix of the Single hand Joy-Con adapter (Right) by Vexelius. Thanks to both of you for your work! For a…
P
Printables
Single-Left-Hand Joy-Con Adapter (+ Status Light, Wristband and Tactile Marking)
Single-Left-Hand Joy-Con Adapter (+ Status Light, Wristband and Tactile Marking) This is an adaptation to the design of Single hand Joy-Con adapter (Left) by Vexelius, so, thanks for this! For a group project at university, we adapted the…
P
Printables
Joy-Con 2 Wrist Strap - Holder
This 3D-printed holder is designed to securely store the two Joy-Con 2 wrist straps (also known as skates) that come with the console. It mounts firmly onto the Switch dock, keeping the straps in place without blocking any critical air…
P
Printables
Cover/Wrist adaptor for Mastfuyi FY106B multimeter
Make this out of a soft filament like TPU, it will NOT work with PLA or other rigid plastics This is a protective cover for the Mastfuyi FY106b (probably fits the 106A too, not sure) but also has slots on the back to run wrist straps (i…
P
Printables
Version 2.1 of my pico paddles for morse code, includes wrist/leg strap mount.
This is version 2.1 of my wrist mounted paddles. Embedded magnets allow for flexible mounting options. It's a minimal hardware design, requiring just a few screws, a stereo jack, and magnets. All parts are listed with links in the…
P
Printables
Keyboard Wrist Rest
Super simple wrist rest for tall keyboards like the Galaxy 100 Epomaker
P
Printables
beefy WW (WristWatch) extruder toolboard mount for PG7 gland
..if The Rock was a toolboard mount. use auto-orient and its pretty much done. both parts are in the same model, so take that into consideration when importing the file to slicer. 04.02.2026 update - increased the depth of mount holes…
P
Printables
Wrist Watch Stand
This modern, stylish watch stand has a sleek, minimalist design that’s perfect for displaying your everyday watches. It features smooth geometric lines and a balanced silhouette, combining a stable base with an elegant watch platform that…
P
Printables
Wrist Rest for Nuphy Halo 96 V1
This is a wrist rest for the Nuphy Halo 96 V1, with slots for anti slip pads. I've printed the rest itself in Bambu Labs Matte White, and the anti slip pads in TPU 90A. Consider printing the model with a brim to prevent warping as shown…
P
Printables
Reiki Timer Case (T-Wrist E-paper 1.54 Inch Display)
🧘 Boîtier pour LILYGO T-Wrist E-Paper 1.54" Boîtier conçu spécifiquement pour le module LILYGO T-Wrist E-Paper 1.54" . Ce boîtier a été créé dans le cadre d'un projet personnel de timer bien-être tournant sur ESP32, avec un écran e-paper…
P
Printables
Flex Mousepads with or without Wrist Rest
Mousepad with wrist rest This one is designed in FreeCAD and the spiders are added as SVG modifiers in PrusaSlicer. You can exchange them and create your own design. The infill is set to 5% gyroid to make the wrist rest comfortable.…
P
Printables
Rest my wrist, Rest !
Keychron K3 V2 wrist rest with bumps to give that accupressure feel. Prints without supports. Orientation changes the amount of print time a lot. Printed mine on the face touching keyboard. 5% Gyroid Infill and 2 perimeter walls. Orange…
P
Printables
nice and comfortable wrist rest for keyboards
Nice and comfortable wrist rest for keyboards which is easy to print and easy to handle. It is possible to weigh down the keyboard with a piece of metal from a hardware store, if desired. The anti-slip feet (TPU) protect the desk and…
P
Printables
RFID Tag Wrist Band
Have you ever locked yourself out of the room by leaving your door badge or card inside? It happened to me pretty much daily... until I made myself this simple TPU wristband that holds the RFID tag from my keychain badge. Simple print…
P
Printables
Nuphy Node Wrist Rest
Wrist rest specifically for the Nuphy Node keyboards but this should work will any keyboard of similar height I would imagine. One version has recessed sections for the below linked grippy tape. It works way better than those little…
P
Printables
Keyboard Wrist Rest
A simple wrist rest made with the Monsgeek M1 V5 in mind, though it works just as well with other keyboards of a similar size. It’s split into two sections—one black and one purple—which gives it a slightly different look without being…
P
Printables
Wristwatch Concept – Minimal Timepiece
This is a conceptual wristwatch prototype developed as an exploration of minimal design and wearable product proportions. The project focuses on simplifying the watch form while maintaining clarity and usability.
P
Printables
Garmin 22mm wristband wallstorage V2
I designed this some years ago in blender, looking forward to redesign it in freecad and make it fully paramteric - sorry this old version isnt. This version also has a special nib for the kind of wristbands I use. This will be removed or…
P
Printables
Cafelat Robot Wrist Guard by JohnMichaelHauck
This is an accessory for the Cafelat Robot Espresso Maker. It is used to make the arms more comfortable when pulling a shot: Here is a link to the Cafelat Robot Espresso Maker: https://www.cafelatstore.com/products/robotpowdercoating The…
P
Printables
robot hand wrist
wrist for robot hand i made instructions for printing print as is any infill preferably paint supports under places that need it but auto generated will do. instructions for assembly from the robot hand run the strings through the wrist…
P
Printables
Fysetc H36 Backplate for A4T / Wristwatch G2 (with and without PUG)
I needed a backplate to mount the Fysetc H36 Combo v2 to my Wristwatch G2 on my A4T. Ziptie Version This version only has a strain relief with zipties. You need two heatset inserts for mounting the H36 to the backplate and two zipties.…
P
Printables
EBB36 Gen2 - WristWatch G2 Mount
onewordFOURWORDS' model was close to what I was looking for but was missing a place to hold the piano wire that I use to stiffen up my umbilical bundle. There was no CAD files provided in the original so I had to start from scratch. My…
P
Printables
Wrist lockable stripe / Event entrance plastic bracelet
Possibilities of use: Event entrance evidence VIP selection Warranty seal Many others purposes Animal label Attention, when you putting it on, it can damages the skin! Be careful! Use at your own risk. It takes a bit of skill to you be…
P
Printables
Apple Watch wristband attachment with space for Micro SD card
This is an attachment for your Apple Watch 22 wristband for safely transporting a Micro SD card. Put the Micro SD card into the little compartment. Then slide the attachment over a 22 mm Apple Watch wristband with the compartment on the…
P
Printables
Honeycomb Wrist Stabilizer
Crafted with a honeycomb structure, this wrist stabilizer offers exceptional strength and durability while significantly reducing its overall weight. The honeycomb design not only ensures optimal support but also allows for better…
P
Printables
Mecanical keyboard 65% with wrist rest
3D PRINTING SETTINGS: Material: PLA Infill: 10-20% Layer Height: .2mm Supports: yes
P
Printables
.950 Wrist Remover
A very large bullet that hits both the target and your wrist/shoulder like a truck. Hilariously heavy projectile with a hollow back for more powder, with a hollow-point-type carving built into the lead core and finished up with a copper…
P
Printables
Magnetic Wristband (Remix) / Magnetisches Armband (Remix)
I needed a magnetic wristband and found the great model from @KevinChagneau_651382. Unfortunately I had none of the two magnet types but lots of rounc 6x3mm magnets. So I used FreeCAD to modify his model to accomodate six of those small…
P
Printables
KBD67mkII Wristrest
Simple wristrest for the KBD67mkII which should sit pretty flush with the case and follows the existing typing angle. It prints comes in 2 pieces with little nubs for alignment, so you'll need to epoxy or glue them together after the…
P
Printables
Wrist Rest Riser (4 variants)
A simple print to fit the need of getting the wrists at the right height for typing. These leather rests work with a particular ergonomic padded product that isn't high enough, but super cheap at places like this…
P
Printables
Wrist Rests Dactyl CC
more simplified version, that can be used with various dactyl like keyboards
P
Printables
Ergonomic Sliding Wrist Rest
This wrist rest is designed to move with your arm, providing continuous support and helping to reduce the risk of carpal tunnel syndrome. Files are available for both right and left hands. The wrist pads can be printed using flexible…
P
Printables
Wristband Extension for Dive Computer - 6 Extra Holes
This wristband extension is designed for Mares (and other models I'm sure) dive computers, adding 6 extra holes to easily adjust your strap when wearing a drysuit. It ensures a more secure fit of your dive computer around your wrist, even…
P
Printables
Drysuit wrist gasket replacement tool
They sell tools to do this and many people improvise with a plastic bottle or soup can, but when you have a 3D printer, why not make a tool! You'll need to print 2 of the spreaders. You can see the process here: https://vimeo.com/120169858
P
Printables
ZSA Voyager Tenting & Wrist Rest Kit
This is a kit I made for my keyboard ZSA Voyager ( https://www.zsa.io/voyager ) for 3 combined purposes: Add the tenting of the keyboard to 7.5 degrees Provide fixed location for wrist rest pads (model = Fellowes wrist pad for mouse, very…
P
Printables
Ergonomic wrist pad for keyboard e.g. dactyl
I printed a few downloaded wrist pads for keyboards but none of them felt right. Most of them were way to high even for the already pretty high dactyl 6x6. i used this wristpad with brila gel pad.
P
Printables
![Wrist Bracelet Parametric [Fusion 360]](https://media.printables.com/media/prints/1024277/images/7778242_8aa85d4b-ffc0-45d5-84ed-afa9b3669c76_dd9596f8-4810-44d8-813b-c6248d29a539/large_display_20240930_201915_1024277.jpg)
Wrist Bracelet Parametric [Fusion 360]
Hi Makers, this is a wrist bracelet design. It is fully editable in Autodesk Fusion. Print with soft TPU or other flexy material and with only 2 parameters and 10% infill for better flexibility. Note that some fonts have problems with the…
P
Printables
NuPhy Air60 (HE) Wrist Rest
For normal 256mm square print beds, this design needs to be printed on its head as shown on the third picture. Brim and either a smoother plate or even glue is recommended to assure it doesn't fall during the print. For the highest…
P
Printables
Battlestar Galactica 1980 Wrist Computron
From "Galactica 1980" also seen in Buck Rogers in the 25th Century Season 2
P
Printables
![Wrist rest for Nomad [E] keyboard](https://media.printables.com/media/prints/1046291/images/7930442_8a43c306-7b36-4210-9e5b-c84f52629114_abd38968-1e7d-47dc-a0df-c67ded608b6f/img_0391.jpeg)
Wrist rest for Nomad [E] keyboard
This wrist rest is designed specifically for the Work Louder Nomad [E] keyboard, and as large as possible for a 256x256 mm print bed as one continuous piece. There are three channels running the width of the model, because one solid piece…
P
Printables
Movable ergonomic wrist rest
When using a mouse, it supports the user's palm to reduce the pressure on the wrist.
P
Printables
Simple Wrist Rest
You can stretch it in the slicer. The picture of the split ones are 100mm wide. I recomend using a consentric top infill patern, as i did with the split wrist rest. I printed at 5% infill to speed up the print.
P
Printables
jakeu's Wooting 60HE Optimum Wrist Rest
jakeu's Wooting 60HE Optimum Wrist Rest Wooting didn't make a matching wrist rest for the Optimum collab, so I decided to make my own! Printing Instructions High bed temp, brim or even glue is highly recommended to make sure the top…
P
Printables
Wrist Watch Docking Station
Keeps the twisting charging cable in place. printed in PETG with standard settings, lh = 0,2 infill 8% updated to V2 (Fusion file and *stl file) Tightened the cable slot
P
Printables
CosPlay - Steam Punk Wrist Watch Frame
A quick mock-up for a Steam Punk-themed wristwatch, designed and printed for my son's book week costume. It will require a separate wrist strap. Category: Bracelets
P
Printables
FlikFlak Children's Wristwatch - Pin for closing the buckle
I printed the pin that is used to close the buckle of the FlikFlak wristwatch of my son. It broke and this repairs it. I print with 100% infill and with 0.08 layer height. I had to slightly increase the temperature to have the filament…
P
Printables
sharkoon purewriter slim palm wrist rest pad
Slim palm rest for sharkoon purewriter keyboard. Added some optional riser pads to get a better angle. Since my printer is too small i made 2 halfs. 5mm*1mm holes for magnets to hold the sides together. Maybe add some sticky tape or…
P
Printables
zsa voyager palm wrist rest pad
Made a minimal palm rest for the zsa voyager. Includes a riser to match the angle when tenting is used. Requires some sandpapering etc. The connection between riser and the pad is not the best but it works and i am too lazy to make it…
P
Printables
Minimalist Wrist Rest
Wrist support for keyboard and mouse use. Print base in PLA or PETG, print Wrest in TPU. Support was used for TPU wrist rest.
P
Printables
Lofree Touch Keycaps and Wrist Rest
Full mouse model For a longer wrist rest, check this out. Unfortunately only available in the US. https://www.lofree.co/products/touch-pbt-mouse-replacement-back-cover?variant=47602401083611 Printable version: Print positioning can be…
P
Printables
Keyboard Wrist Rest
1. Print the Left_Base and the Right_Base out of a hard filament (e.g. PLA, PETG, ABS, etc.): 2. Print the Left_Cover and the Right_Cover out of a flexible filament (e.g. TPU): 3. Connect the Left_Base and the Right_Base using the…
P
Printables
Wrist watch strap retainer clip
v2: wider top to prevent accidental unfastening This clip is both small and large enough not to fall out of the watch holes during everyday use. Very simple flat printing with normal supports is pure pleasure. Enjoy! If you would like to…
P
Printables
Print In Place & Parametric Wristband for your projects
Print In Place & Parametric Wristband for your projects by Earthworm Jon Use this design to create and make a print in place wristband to fit your project and wrist! Basic Instructions Open the designs in Fusion 360. Change the width of…
P
Printables
Wrist wrest for Montech Mkey Darkness (Full Size)
I bought a full size Montech Mkey Darkness mechanical keyboard and noticed some wrist fatigue after long gaming sessions. The keyboard is pretty nice, but it's initial height on the bottom side is pretty high (~20mm). So the wrist needs…
P
Printables
3DConnexion SpaceMouse Compact Wrist Rest with Stream Deck Stand
Available as one large model or separated with alignment pins (2 pins are required). Has versions with or without a cutout for a soft palm rest surface. I printed the large single-piece model (pictured) vertically on a Prusa XL. I also…
P
Printables
Spherical festival wristband clip
Here is a simple replacement clasp for textile bracelets (“festival wristbands”). It can be used to replace broken or non-adjustable closure. I designed for wristbands with a thick fabric, and it sits very tight on those. You can use it…
P
Printables
Ergodox Tent and Wrist Rest Base
This is a tented riser for the original Ergodox with the layered acrylic case. It takes the place of the bottom acrylic layer. It adds tenting and a wrist rest. The files here add 6° of tenting. There are two versions, one that takes M3…
P
Printables
magnetic wrist band connector
Wristband connector. Use magnets 3mm diameter, 2mm height. press magnet into the hole, keep polarity of the magnets in mind. I used PETg for best results. Additional notes I'm interested in your feedback to improve my stuff! So give me…
P
Printables
PICO MMU WristWatch G2 filament hub mount
I have only dry tested this with a mock extruder/motor. Feedback is appreciated if you run into issues. Here's a WristWatch G2 filament hub mount I modeled as I plan to be making a PICO MMU soon. I modeled to fit the two sensor version of…
P
Printables
Wrist brace - Arm Cast - Orthosis - Rounded both sides
Wrist brace - Arm Cast - Orthosis - Rounded both sides Category: Other
P
Printables
festival wristbands organizer
The simple way to organize and show your festival wristbands. They can mounted on the wall or stands free.
P
Printables
Garmin wrist band 22mm wide (eg. vivoactive 4)
Shorter band, and a less intrusive lock ring compared to the original. Can print on the side, but if the holes rip, better to print it flat for strength.
P
Printables
Keychron Q11 Tented w/Wrist Rests and TPU feet
I tried a few other tenting kits and mashed together the things I liked about them into a single model then made some mods. I took the general design of this model:…
P
Printables
WWBMG WristWatch extruder for IDGA with Sherpa Mini mount and hotrod smooth idler
Had an OEM IDGA gearset laying around and I had nothing else to do with it. Clockwork2 seemed to be unecessarily complex so I opted to butcher WristWatch2 BMG version to make it fit IDGA as it's already fairly similar. Just needed to move…
P
Printables
Wrist rest for mouse workers ;)
I could not find a suitable wrist rest anywhere on the market, most are immovable cushions which are uncomfortable when working for long periods. I developed wrist pain from long hours at the computer. Now my wirst can rest :) Its can be…
P
Printables
Sliding Wrist Rest v1 with feet (Carpio / Delta Hub inspired)
v1 is with 6 feet to reduce friction; v2 is with 2 layers of PETG without foot. To me they both feel equally slippery on flat desk surfaces. I've used the original design for a while and think it could be even better if printed in TPU…
P
Printables
Nitehawk 36 Rev 1.4 mount for Wristwatch G2 extruder
Changed to fit the Rev 1.4 of the LDO Nitehawk 36 toolhead board. All Credit goes to Hartk for original design.
P
Printables
WristWatch G2 Single Filament Sensor
I took the top half of the dual filament sensor and the bottom half of the original, then combined them for a single filament sensor. After that, I reduced the extra size of the top half which was made larger for aesthetics with the…
P
Printables
Keyboard Wrist Rest for Razer Ornata V2
Use A replacement wrist rest that has the same dimensions as the Razer Ornata V2 wrist rest, but it can be used with other full size keyboards as well. Uses the original feet from the original wrist rest, but is pretty stable without them…
P
Printables
Keychron Q11 Split Keyboard Tenting w/ optional wrist rests and optional screw attachments
This is a remix of @PaulGrimes_855599 's tenting base for the Keychron Q11 split keyboard. This design is set up for Keychron's own wooden palm rest but it should work fine with many others too. Some problems I had with the original and…
P
Printables
Optimized Wristwatch G2 Dual Filament Sensor
UPDATE (7/11/2025): I have uploaded my filament_sensors.cfg and a text file of the same macros. My macros are set up for use with an EBB36 over CAN. If you do not use CAN bus, be sure to edit the macros to suit your machine. UPDATE…
P
Printables
Daggerwrist
a man size predator that lives in the pocket forest of a planet called darwin 4 there will be more aliens from darwin iv to come Category: Creatures
P
Printables
Wooting two HE Wrist Rest Attachment Braces
You only need to print either the two big ones (recommended) or the 4 small ones. Tested Setup: Material: PLA Infill: 5% Layer Thickness: 0.2mm Printer: Prusa i3 Mk3S+
P
Printables
Garmin/Wahoo Wrist Adapter – Turn Your Bike Computer into a Smartwatch!
Ever wanted to use your Garmin or Wahoo cycling computer like a wristwatch ? No? Well now you can! This adapter plate lets you strap your bike computer to your wrist using a basic strap and buckle —no fancy accessories needed. Just grab…
P
Printables
Ergonomic wrist rest - Modular
Ergonomic wrist rest. Default files are for right hand, mirror the parts in slicer for left hand prints. Designed modular for printing the pads in TPU without the need of MMU/AMS. Base has got slots for 1mm mouse skater pads. Use gyroid…
P
Printables
WristWatch G2 Mods
Overview: This listing will be a compilation for all of my WWG2 mods. As time goes on I may add more here as I see fit. List: Beefy Tension Arm Chamfered Filament Inlet Details: Beefy Tension Arm; I had my arm snap on me one day…
P
Printables
Cloud Wrist Rest for Keyboard
Cloud-shaped wrist rest, designed for Akko 5075S and other mechanical keyboards. 📏 Dimensions: Width: 12.8 mm Length: 7.5 mm Height: 20 mm (highest) to 6.5 mm (lowest)
P
Printables
Mini slider wrist band
It is vary small the string I had was ~2mm in diameter, and the clip is 6x12mm. I made it to be a wristband for the FlyBoard 2.0 by 3DDengineer https://www.printables.com/@3DDengineer Flyboard 2.0…
P
Printables
Wristwatch Dual Filament Sensor BTT EBB36 mount
A remix of the “Orbiter V2 BTT EBB36 mount” to fit on the Wristwatch dual filament sensor extruder: https://github.com/bythorsthunder/Voron_Mods/tree/main/Wristwatch_G2_Dual_Filament_Sensor I don't know if it fits to the Wristwatch…
P
Printables
Sliding Wrist Rest v2, flat with no feet (Carpio / Delta Hub inspired)
v1 is with 6 feet to reduce friction; v2 is with 2 layers of PETG without foot. To me they both feel equally slippery on flat desk surfaces. Thx for @MarcoDiNoto_1234805 for giving me the inspiration to print PETG alone side TPU. They do…
P
Printables
gaming wrist rest
You can add something on the bottom to help it glide better. (YES, this is a remix)
P
Printables
Ergodox EZ Wrist Wrests
Ergodox EZ Wrist rests. Put the f3d model in so you can import it easily and make adjustments to height/width depending on hands. Mirror in slicer to get both halves
P
Printables
StealthChanger Dragon Burner EBB36 Mount for WWG2 (Wrist Watch G2)
This is a mount for my StealthChange setup. This will fit on a WWG2 with a EBB36, it also clears the OptoTap. There's also a hole for a spring steel support for the umbilical. You'll need 2 M3 heat insert (Standard Voron M3s M3x5x4mm) to…
P
Printables
Wrist Lock for e-Nable Phoenix v2 Assistive Device Assembly
Description: This revamped two-piece print locks the e-Nable Phoenix V2 assistive device at a 30deg angle for proper string tensioning between the palm and gauntlet. Print Notes: PLA or any material is fine. Advise 30% infill or more if…
P
Printables
StealthChanger Dragon Burner EBB36 Mount for WWG2 (Wrist Watch G2) mod
To be able to mount EBB36 cover over this, I made heatinsert holes 1mm deeper on the mounting plate, so my 5mm M3 standoffs reach better to hold the PCB on it. Cover is then mounted on these standoffs with M3x20 screws. Also shaved 0.5mm…
P
Printables
Keychron Q8 Max Wrist Wrest
NackHabitat #0087 - Keychron Q8 Max Wrist Wrest For printing whole or dovetail yourself: Part A - 0087pAv1_Keychron Q8 Max Wrist Rest, Whole (3.6.2025) For printing in halves, pre-dovetailed: Part B - 0087pBv1_Keychron Q8 Max Wrist Rest,…
P
Printables
dummy 13 predator wrist blade
it is the wrist blade from the Predator franchise in to dummy 13 please comment if i need to improve it
P
Printables
Keyboard or Mouse Wrist Rest - Glorious Model O Skates
Print with variable layer height for best results