1 / 3

WristWatch G2 Extruder

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Tetsu

@Tetsu_2210073

This is WristWatch, a standalone extruder designed by @bythorsthunder WWG2 is built as an alternative to WristWatch BMG

Ocena: 5 / 5
Polubienia: 334
Pobrania: 1309
Wydruki: 8
Wyświetlenia: 10 066
Oceny: 4

Aktualizacja u źródła: 20 lip 2024

Informacje o modelu

Źródło: Printables
Kategoria: Voron Parts & Upgrades
Licencja: GNU General Public License v3.0

Szczegóły Pliki (32)Wydruki i komentarze (Wydruki: 8) (Komentarze: 16)Remiksy (8)Kolekcje (410)

GitHub - tetsu97/WristWatch-G2-Extruder: This is WristWatch, a standalone extruder designed by @bythorsthunder WWG2 is built as an alternative to WristWatch BMG etruder - but it uses Galileo 2 insides for pushing filament. Development started approximately when G2SA was being worked on, but later Thor was kind enough to allow me help him with further refinements of this extruder.

Extruder uses Orbiter 2 mounting pattern. I tested it with Xol toolhead, but other toolheads should work as well as long as they support mounting pattern. Mounts for other popular toolheads are being worked on as well, so, stay tuned.

Extruder is made up of 3 parts: Main Body, Rear Plate and Tension Arm.

BOM

2 M3 Heatset Inserts
1 M3x15
1 M3x25
1 M3x30
1 Galileo 2 Extruder Kit

Tagi

extruder voron galileo2