Charybdis and Scylla wrist rest out of flexible filament TPU
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A wrist rest for the Charybdis and Scylla Keyboard from bastardKB out of TPU
- Ocena
- 0 / 5
- Polubienia
- 29
- Pobrania
- 161
- Wydruki
- 0
- Wyświetlenia
- 3141
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a wrist rest for the Charybdis and Scylla Keyboard from https://bastardkb.com/ .
The bottom part can be printed in PLA or PETG, the top one I printed upside down with ziro 95A TPU with 2.1mm wall thickness, 0.75mm for the bottom layers (top side of the wristrest) and 0 top layers because it's a waste of expensive TPU and really hard to print with the 3% Gyroid Infill. This gives me the squishiness that I find comfortable, but you might want to adjust, mine barely buckles.
I use the same kind of rubber feet the keyboard comes with, 10mm diameter, 2mm thick.
For a right scylla or left Charybdis just mirror the models.
The whole wrist rest is 38.5mm high with the rubber feet, I would recommend to test what height you find comfortable with random objects and then adjusting the height of the cushion (not the base!) in the slicer.
0 top layers in prusaslicer don't work so I set it to 1 top layer and set a filament change at the last layer and adjust the height adding the height of the last layer, I hope this makes sense