Keyboard Wrist Rest
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Scale in your slicer for any keyboard. Original size designed for the GMMK Pro 75% custom mechanical keyboard.
- Ocena
- 5 / 5
- Polubienia
- 52
- Pobrania
- 325
- Wydruki
- 6
- Wyświetlenia
- 1809
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Post a make if you print! I would love to see it.
Made for the exact length and height of the GMMK Pro but will likely be a very close match to any 75% keyboard. You can also scale it in your slicer for any keyboard length or for any desired height.
Design has a more subtle and smaller curved slope profile as many options online were huge and flat with only a small angle.
Add some slim rubber adhesive pads in the corners to prevent it sliding around your desk.
Splitting
Unless you have the Prusa XL or a printer with a similar sized build plate, it is necessary to split the part into two in your slicer or it will not fit on the build plate. I used the ‘add connectors’ feature in the part splitting options in Prusaslicer to add two 8mm x 8mm pins. They were a perfect tight fit with no glue required on my stock mk3s+ with the pin tolerance set to 0.08mm. I used supports under the male pins. I then printed one half in black PLA and the other in cool white PLA for the two-tone appearance.
Glorious and Keychron printable volume knob risers
While you're here, check out my volume knob risers for Glorious and Keychron keyboards. They let you have a taller volume knob while still keeping the original one instead of a printed one.
Glorious (fitted in first image): https://www.printables.com/model/868661-gmmk-pro-knob-riser
Keychron: https://www.printables.com/model/870433-keychron-knob-riser-q1-etc