Keyboard Wrist Rest
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Scale in your slicer for any keyboard. Original size designed for the GMMK Pro 75% custom mechanical keyboard.
- Rating
- 5 / 5
- Likes
- 52
- Downloads
- 325
- Makes
- 6
- Views
- 1,809
- Reviews
- 5
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Post a make if you print! I would love to see it.
Made for the exact length and height of the GMMK Pro but will likely be a very close match to any 75% keyboard. You can also scale it in your slicer for any keyboard length or for any desired height.
Design has a more subtle and smaller curved slope profile as many options online were huge and flat with only a small angle.
Add some slim rubber adhesive pads in the corners to prevent it sliding around your desk.
Splitting
Unless you have the Prusa XL or a printer with a similar sized build plate, it is necessary to split the part into two in your slicer or it will not fit on the build plate. I used the ‘add connectors’ feature in the part splitting options in Prusaslicer to add two 8mm x 8mm pins. They were a perfect tight fit with no glue required on my stock mk3s+ with the pin tolerance set to 0.08mm. I used supports under the male pins. I then printed one half in black PLA and the other in cool white PLA for the two-tone appearance.
Glorious and Keychron printable volume knob risers
While you're here, check out my volume knob risers for Glorious and Keychron keyboards. They let you have a taller volume knob while still keeping the original one instead of a printed one.
Glorious (fitted in first image): https://www.printables.com/model/868661-gmmk-pro-knob-riser
Keychron: https://www.printables.com/model/870433-keychron-knob-riser-q1-etc