Counting matching models…
I removed the split compartment in the front and the hole for the USB cable. I have my wifi dongle for the Android car in the arm rest, hence my USB is used anyways and I don't need to feed the cable through and I have the option of…
In my opinion the original bracket is too thin and I didn't feel comfortable with it. So I opened it in Fusion and made it thicker. The Orbitool 2 toolhead board still fits, only the “outside” is edited. I used these settings and printed…
"This wedge will allow you to use your armrest without the ratcheting mechanism catching. Easily just remove the trim piece with vents. Remove the M6 screws holding the ratcheting arms. Install this wedge with M5 flat head screws. (You…
I wanted to mount a removable sun shade behind the headrests using magnets included with common rear window sun shades. This setup allows the shade to be installed or removed quickly and utilize the hook to hold a kid's tablet case while…
Hey, I had a disassembled drawer lying around and thought, why not use it for a quick project? I wasn't happy with the footrest I bought previously, so with a plank from the drawer and about 10 minutes of CAD work, I came up with this.…
The top backrest mount of my chair broke, I think the design is flawed. This part replaces the original mount and moves the backrest a little further back so that it rests on the “spine”. Print with 100% infil, doesn't really matter what…
Crest of the Polish club from Cracow. Wisła Krakow has a conflict with the Cracovia club
This plate was generated from different svg templates and mainly reworked on CorelDraw!, then exportes as svg and imported in TinkerCad, cut out, joined, finished and exported as individual stl-files, which you can drag into your slicer…
a steeper angled part to improve the directionality of the tweeters, with the whole thing recessed into the recess of the car to minimise how much room they take up. my print was done with PETG in matt black, using tree supports in prusa…
a heavily altered version of Wrist rest v4 w/ fillets by CarterArris - Thingiverse , (alternate link: https://www.thingiverse.com/thing:4808839 ) which was loosely based on the 𝘿𝙚𝙡𝙩𝙖𝙃𝙪𝙗 𝘾𝙖𝙧𝙥𝙞𝙤. I modelled it so that it fitted my needs for…
Cheek rest that can extend 15mm higher than the original and still goes all the way down. Print and use the same as the original. Update: Added one extended by 30mm from the original as the 15mm was barely tall enough.
Beautiful Christmas decoration, just insert the LED light.
Designed this to hold the cord and controller for our Presto brand griddle. May work for other brands too. I used double-sided mounting tape to stick it to the inside of my cabinet door where the griddle is stored. Could also use a…
Wall Control hooks from Winston Moy. See his site: https://www.winstonmakes.com/shop/p/wall-control-tool-holders
I have the Decathlon camping folding armchair and I was pretty annoyed at how the armrests aren't real armrests because they would slip down if you tried resting your arms on it, so I made a stopper that snaps onto the metal bars. Can be…
At rest this Poppy Spitfire is easy to print. I created all these when resin was pretty new. These would be perfect for resin now.
Replacement rear tire rest for Steady Rack. This model works great for anything up to a 2.6" mtb tire.
This is a nice decorative yet still functional vase I designed in FreeCAD. The cup bottom should be watertight, and has a slight internal lip to reduce the chance of a spill. It prints without supports. I also created a candy bowl…
The Shadow Crest Vase is a sculptural masterpiece that blends raw elegance with a modern, organic aesthetic. Inspired by the contours of mountain ridges and the soft waves of fabric, its layered textures and irregular top edge create a…
Side mount for Ikea Office chair replacing the side rests. The arm rests was annoying as the prevented the table from getting down to right height.
Angled brush rest to keep water away from ferrule. Attached tray to catch drips.
Remove the battery cover (keep the screw) and screw in the new stock. It may not be a perfect fit, so some cutting with pliers may be needed. Not very practical and kinda short, but still cool. Note: Firestrike laser won't work with…
Apr 2026 - recently tried it on my wife's Mazda cx5 and that worked well too. Printed a vertically scaled model for a longer armrest, then crafted/sown together a larger pad, feels great! (Orange IRL pic is scaled up to about 245mm…
I made this after the original arm rest cover on my Sidiz T50 split, also it doesn't match the original covers very closely so maybe print a pair.. oh but it's tpu so that's going to take you forever, good luck
This majestic 3D sculpture features a proud falcon perched on an ornate heraldic shield. Designed with intricate details and a noble stance, it makes a perfect decorative piece, gift, or collector's item. The shield area is ideal for…
A detailed 3D printable bust inspired by the iconic house of ambition and cunning – perfect for fans of wizarding worlds! This majestic Slytherin-style shield features a coiled serpent in high detail, elegantly framed on a raised base.…
This version is for personal use only. For commercial full size versions with dual extruder, flat and wall hanger options, please visit my other stores. https://cults3d.com/@Duststarr3D Duststarr3d’s Portfolio of 3D Models - Thangs…
The part that is built into the armrest of my 2006 Chevy Silverado 2500HD Duramax broke. Without it, the door panel pulls away from the door when closing it. It's a very simple design but it seemed to work. I just epoxied the s*!t out of…
This is a pretty rough but already functional prototype of an armrest spacer for the Alfa Romeo 159. With my height of 176 cm, the armrest height with the spacer became just perfect — before, I could barely even reach it. For now, I’m…
Before you go further! This model is available for free for all my supporters in Printables Club 🧡 Consider joining my club to have access to all ⭐⭐⭐ exclusive projects ⭐⭐⭐ and be part of my community! This project is for personal use…
Flaschen - Restesammler: Wer kennt es nicht, den Rest aus dem Essig…, den Rest aus der Spüli-Flasche… Mit diesem Tool geht nichts verloren :-) PETG/PLA 0,2mm Es gibt die ECO-Version und die Version die besser aussieht - sucht euch aus was…
My right armrest broke on my garden tractor. I couldn't find a replacement part anywhere so I decided to draw one. This part fits on a Stiga 9122 XWS garden tractor. The part is too big to print on a Mini printer, so I split it into 2…
If you own a Peloton bike and you would like to use a virtual biking app like Zwift or MyWhoosh, then you might want to use a tablet with it. This holder is simple to print and has enough stability to prevent the tablet from falling. I…
Gasket for tubeless Presta valve, designed for Lezyne CNC TLR Valve 44mm, may work for other presta valves too. Print settings TPU filament (softer is better) 0.4mm nozzle 0.12mm layer height (any should work) no supports default infill…
The original component was hollow (presumably for cost efficiency), but I didn’t replicate that — the goal here is to make it stronger. It works very well. :) Printing tips: Material: PETG Infill: 100% Support: Yes (Normal, not tree) Use…
Land Rover Discovery 3 armrest cap. Print instructions Printer Brand: Prusa Printer: i3 MK2.5 Brim: No Supports: No Resolution: 0.15 Infill: 20 Filament: Any ABS or ASA Black
It's a lid with screw in holder for soaking the paint brush in the vallejo 85 ml / 2.87 fl oz bottles. It's 3 parts. A lid to screw on to the Vallejo Brush Cleaner og Brush Restorer bottels (85 ml / 2.87 fl oz). A brush holder that screws…
It's a rest for up to 5 paint brushes, recommend using 2 one in each end. But one should work perfectly fine. Print how you want should not require supports, did 0.4 nozzel 15% infil and .2 layer hight.
A high-detail alien portrait relief designed for FDM printing, perfect for sci-fi enthusiasts and UFO believers. These thin, lightweight wall panels make striking décor for your home, office, or gaming space. Available as a single panel…
Arakawa family crest from Yakuza / Like a Dragon video game series. *Note: I'm new to 3D modeling, so the design and print profile might still be improved with some tweaking. Feedback is welcome!* I've also started a collection where I'll…
Dojima family crest from Yakuza / Like a Dragon video game series. *Note: I'm new to 3D modeling, so the design and print profile might still be improved with some tweaking. Feedback is welcome!* I've also started a collection where I'll…
The tool works great in silk PLA and PETG-CF so far. It's a quick print, coming in under 3g of filament. I printed both materials at 0.20mm layers and arachne wall gen on. The silk was printed with “strong” 6-wall defaults, and the…
Kazama family crest from Yakuza / Like a Dragon video game series. I've also started a collection where I'll be uploading new models as I create them — feel free to check it out and follow along! Yakuza Family Crests
this will fit on presta valves that have a threaded shaft it doesn't twist on to the upper most part pf s presta valve.
Adapter for inflating Sleeping pad with PARKSIDE air pump, I use PCTG and 0,25 nozzle
Welcome, and thank you for choosing my model. I will provide some context for this model. I created this model to store the Watch Repair Kit I purchased on Amazon. I chose for two smaller boxes instead of one large box because it is…
This chunky little bear has parked his paws and is patiently waiting for snacks, compliments, or both. With wavy carved fur and a calm “I’m just vibing” face, he’s perfect as a desk buddy, nursery décor, or part of a woodland set. Prints…
This is a replacement joint for a garden chair, designed to connect the backrest and the seat. The original plastic part often breaks due to stress and outdoor conditions, so I modeled a stronger and more durable version. The joint…
PRINT IN TPU!!! Flying v knee rest i designed for my custom 50s V I thought I might as well put it here alongside the pickguard for anyone that needs it
The Singer 911 DLS Turbo Road is a masterpiece of automotive artistry — a modern restomod inspired by the legendary Porsche 911 , combining classic aesthetics with cutting-edge engineering . This model faithfully captures the signature…
I have a Moon Cresta arcade cocktail table that was missing a coin box and coin door. I created this as a quick and easy solution. The main box fits inside the cabinet. the front panel is covers the opening and still leaves room to stick…
Capture a moment of peaceful prairie life with this 3D printable STL model of a Cute Resting Bison. This gentle giant is perfect for adding a touch of rustic charm and serene wildlife to your displays, dioramas, or miniature natural…
Add a touch of rustic charm and comfortable seating to your miniature scenes with this 3D printable STL model of the Oviedo Leather Stool. This stylish furniture accent is perfect for enhancing dollhouses, dioramas, or any interior…
imported to fusion and made to be flat on the bed and not need unneccessary supports.
Single part ring to extend a Silvercrest Food Dryer to fit Filament Rolls inside. Could work with other Food Dryers as well. It is printable on large printers only, like the Prusa XL. I created several sizes so you can print the size best…
This Halloween Krampus looks like he just emerged from the darkest forests. 🌲👺 With his towering horns, feral grin, and a wicked trident in hand, he embodies the fury of folklore legends. The detailed fur texture, clawed hands, and…
Replacement part for the sliding part in the center vent. The whole vent section on the Forester can be popped out by using a screwdriver to pop up the clips above the screen, on the sides and and below the vents. Once popped out you can…
1. Structure & Shape Form: Compact dome, capsule, or boxy structure with smooth edges and soft curves to reflect calmness. Entry: A circular or arch-shaped entrance large enough for easy access (about 20–25 cm diameter). Levels: Some…
Straight from the crypt and into your print bed — this gothic mini-badge brings Halloween style wherever you bring it
UPDATE [4/30/26]: In lieu of Libernovo changing the hollow square slot to be solid, I have designed a newer version that will work with all models and is stronger. After taking apart my armrest after months of using the first version, I…
A replacement door latch arm for your Panasonic microwave. Mine is a "the genius Prestige" model #NN-SN797S built in March 2013. The two guide pins on my latch arm broke as shown in the photo. Print Instructions: PETG is recommended. PLA…
This is a collection of parts I modeled out (just tinkercad) to mount emergency lights behind the headrests in the rear of a crew cab Sierra. I assume the double cab uses the same dimensions, but thats unconfirmed. The center seat I…
Use the 3ds max 2020 version or later. I didn't remove the spline lines in the project, so feel free to change
IMPORTANT: holes have been sized to print correctly at 300% scale! Scale all stl parts in Prusaslicer before slicing. 3mf files have already been scaled. Modified the excellent model by fasteddy to function as a tree-top ornament. With…
I created this model as a reference for creating a real arm wrestling table, but I modified it to be a printable model. The design may need improvement since I haven't tested it. I've also included the Blender model in case you want to…
This is my favorite game of all time. I created this design in 2018 and published it on BGG. Only after seven years did I publish it on Printables. The purpose of this project was to reduce setup time and the hassle of handling tiles…
The cute articulated forest dragon just got given the glass eye treatment! :) Two variants provided in 3mf form. One is for keychain and the other isn't. Files are named accordingly. No supports or brim used. Very easy print. UPDATE: STLs…
If you enjoy my designs and would like to support my work, or get a commercial license to sell prints of my models — you can join me on Patreon: 👉 https://www.patreon.com/cw/AR3DP Low-poly dragon with leaf-like textures, soft earthy…
Found this wonderful models of a druid and a suiting forest base plate that I combined because I thought they fit very well together. All credits for the models to the original creators.
this is a very hard print if you make it giant [which I tried.]
Enjoy this enlarged version of a United States Forest Service Shield. Optimized for Wall Décor, it will look great on your office wall! See my profile for other Forest Service wall décor. The model has been optimized to print on an Ender…
The HBADA E3 Pro Office / Gaming chair is known for his excessive height of the 6D-armrest. With the standard armrest, it's impossible to have a comfortable seat height and still be able to move closer to the desk with the armrests being…
Logo Mandalorian Crest sus dimensiones son 60 milimetros de radio por 5 milimetros de altura hay dos logos uno con fondo y el otro no The Mandalorian Crest logo has dimensions of 60 millimeters in radius by 5 millimeters in height. There…
Over time, the wall adapter plug became loose and would no longer stay in position to charge the vacuum properly. This fix fits into the available space on the wall mount to lock the plug in place and prevent it from falling down when…
This hook is centered between the headrest posts for a Honda CRV. The posts are about 13 mm in diameter and spaced 141 mm apart. I printed from PLA with 3 wall layers and 20% infill.
The spherical concavity adds rings similar to topographical lines, with each layer showing the alternating fill direction of the nozzle -- I think these add a nice texture to the top surface. Here are some sizing suggestions, Small:…
A little thumbrest for your low D whistle. It will also keep your whistle from rolling off the table when you go for your glass of beer :) I printed in PLA at 15% infill. No supports are needed if you put the top against the build plate.…
This is a printable Stabilizer leg with optional Foot Rest or "Dead Pedal" that can be a great place to rest you feet if you don't have a clutch pedal or a mount for the pedals. No supports should be needed! The stabilizer can be…
A quick restrictor gate I cooked up for my Zippyy stick for Street Fighter V. It's a pretty quick print and mounts using the original screws and holes. Not the shortest throw, but to me it feels much better than the square gate it comes…
Super simple wrist rest for tall keyboards like the Galaxy 100 Epomaker
Roblox The Owl 99 Nights in the Forest fingers are thin! Remove the supports carefully. Remove the support arms very carefully. I adjusted the left leg from the front using a lighter, as there were problems with the centre of gravity.
100x160mm signs, , featuring art of a running person, the words "Rest Room", and arrows pointing right, left, or up Mesh and Solid (may print easier) models provided. Best with color switch above 1mm, as with included gcode. Pictured in…
I've created this armrest insert to aid in keeping things more organized in there. Box size is 120 x 167 mm and the brim is 128 x 171 mm. Brim size can be increased by about 6mm all around (3mm per side) if you want a snugger fit. The…
I merged together the official g502 plate model and a nice finger rest I saw on here but didn't like it going behind the mouse. I also added a little slot for 5,2mm radius magnets. It's a bit tricky to mount it but it's worth it
The factory headrest in the vertta pro chair pushes my neck very forward making it uncomfortable. This version brings it back 3,5cm improving ergonomics. The tolerances in this model could be a little bit better as the prongs don't fully…
To add to my Dragons series - this is a resting dragon model. The stl file is included and I have shared my Bambu Project, I printed this with supports (Tree) on bed only and results where great. As with my other models, the more follows,…
When joining the two parts together i have relied more on fusing the plastics together then the connector. I suggest printing it whole or using an adequate solution.
The stand is divided into 3 parts, with the "S" shaped part being the component which will hold everything together. The "C" shaped clamp goes into the rectangular slot on the stand as shown in 2nd Image, and depending on your printer's…
Follow original instructions and only replace the following files: Gear 7 v1.3.stl Gear 22 v4.3mf And use a screw to join the driving shaft pieces (cross comes separated).
Keep your car organized and your passengers entertained with this 3D-printed multipurpose headrest accessory! This smart design combines a sturdy bag hook with a stable phone mount for the back seat. Make sure to orient on its side for…
A durable, low-profile hook that mounts securely to your vehicle’s headrest posts and can be removed in seconds. Includes printing plates for .5" (12.7 mm) and .555" (14.1mm) headrest posts and features non-slip contact points to keep…
![Universal Vehicle Window Armrest [STURDY!] for Car Truck Van Sedan](https://media.printables.com/media/prints/b2f98d5e-8461-4564-9686-ca987c0a7d27/images/12573660_187261b7-cf9c-4bfa-97a2-c4caca94a7f1_74ab2709-3349-4fe8-91c7-fb1dc5b66efe/20260407_111147.jpg)
