Guitar Neck Rest (OpenSCAD)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Guitar Neck Rest to securely hold your guitar on it's back while you are working on it. This design is reworked from…
- Rating
- 5 / 5
- Likes
- 174
- Downloads
- 1,248
- Makes
- 14
- Views
- 4,806
- Reviews
- 12
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
Guitar Neck Rest to securely hold your guitar on it's back while you are working on it.
This design is reworked from https://www.thingiverse.com/thing:413815 to use less plastic and print in 1/2 the time. Like with Daeken's post, the OpenScad is included, so that you can adjust the size to your taste.
It works great for both solid body electrics and acoustics.
I used 3/32 sheet cork from Hobby Lobby glued on with Locktite spray adhesive "300 Heavy." Be sure to mask off places you don't want glue. This stuff is STICKY. Trim with a razor blade and sand slightly with 220 grit.
Print Settings
Printer:
FLSun Cube
Rafts:
No
Supports:
No
Resolution:
0.2mm, first layer 0.3mm.
Infill:
20%
Filament:
any cheap brand, PLA 1.75mm,
any color
Notes:
Rotate model to print on its side.
This print is very easy to create, but takes about 11 hours with 0.2mm layer height or about 8 hours with 0.3mm layer height.
Category: Tools