Guitar Neck Rest (OpenSCAD)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Guitar Neck Rest to securely hold your guitar on it's back while you are working on it. This design is reworked from…
- Ocena
- 5 / 5
- Polubienia
- 174
- Pobrania
- 1248
- Wydruki
- 14
- Wyświetlenia
- 4806
- Oceny
- 12
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
Guitar Neck Rest to securely hold your guitar on it's back while you are working on it.
This design is reworked from https://www.thingiverse.com/thing:413815 to use less plastic and print in 1/2 the time. Like with Daeken's post, the OpenScad is included, so that you can adjust the size to your taste.
It works great for both solid body electrics and acoustics.
I used 3/32 sheet cork from Hobby Lobby glued on with Locktite spray adhesive "300 Heavy." Be sure to mask off places you don't want glue. This stuff is STICKY. Trim with a razor blade and sand slightly with 220 grit.
Print Settings
Printer:
FLSun Cube
Rafts:
No
Supports:
No
Resolution:
0.2mm, first layer 0.3mm.
Infill:
20%
Filament:
any cheap brand, PLA 1.75mm,
any color
Notes:
Rotate model to print on its side.
This print is very easy to create, but takes about 11 hours with 0.2mm layer height or about 8 hours with 0.3mm layer height.
Category: Tools