1 / 3
(Wooting) Keyboard Wrist Rest: 60%(Mini), 65%, 80%(TKL), 100%(Full-size)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple wrist rest based on the wooting wrist rest. Can be printed in 2 parts or a single part
- Ocena
- 0 / 5
- Polubienia
- 38
- Pobrania
- 220
- Wydruki
- 0
- Wyświetlenia
- 1751
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
SzczegółyPliki (12)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (35)Powiązane
Sizes of the models (Width):
| Size | Width (mm) | |
|---|---|---|
| 60% | Mini | 293 |
| 65% | - | 311 |
| 80% | Tenkeyless | 366 |
| 100% | Full Size | 399 |
Printing Instructions:
- Resize: If needed (already common sizes), resize the model to fit your specific keyboard.
(Needed width/model width) x 100 = scale percentage
Only enlarge, don't reduce (nut wont fit)

- Orientation: Print the model with the top surface flat on the print bed (see image for reference).

Material:
This model is designed for printing with PLA or PETG filament. For extra comfort, you can also print it in TPU filament, which is a more flexible and softer material.
Suggested Printing Settings:
- Layer Height: 0.2mm (a good balance between print quality and speed)
- Infill Density: 15-20% (provides support without using too much filament)
- Support: Not needed
Assembly Video:

Part List:
| Part | Quantity | Links |
|---|---|---|
| Bumpon 8mm | 8 | AliExpress Link |
| (Split model) M3 Socket screw (min length 4mm) | 2 | AliExpress Link |
| (Split model) M3 Nut | 2 | AliExpress Link |
Customization Ideas:
- Unique Top Surface: Modify the bottom layer pattern in your slicer software for a unique texture on the top surface (see image for an example).

- Extra Comfort: Print the model in TPU filament for a softer, more comfortable feel.
- Two-color Effect: Print the first few layers in a different color to create a two-color effect (see image for reference).

Please post your make! I would love to see it.
Enjoy your new 3D printed wrist rest!