Liczymy pasujące modele…
left part, right part and center clips needs to put the joiner bars (wood or something) on front and back outside without keyboard foots, bluetooth, and easy switching Win-Mac I gave up the battery space for bluetooth.
Wydruk około 0,15 €–0,18 € nettoWstępna wycena jednego wariantu
This function keycap is designed to prevent accidental key presses from the front of the key. Compatible with keychron Low-Profile Optical switches. Remake of Anti-Accidental Keypress Function Key -…
Included some small colored plugs if you glue the project. Alternatively it supports the M3 use as per the original.
Replace the original keycap and convert your Keychron K3 into a hitbox for fighting games.
I printed with DevilDesign Petg but you can use almost any material. Also printed in standing orientation with support for the upper claw.
Remixed from @derekyle_481832. These are feet that attach to the bottom of the keychron Q6 max (and maybe other models) to give it a bit of lift. I really liked the original but it was too steep for MOA keycaps. Requires 4 M3x25mm socket…
Decided to make feet for my keychron q1, should work with other keychron Q -series keyboards. The feet are bolted onto the m3 bolt holes present on Q -series keyboards. Original m3 bolts are too short to work with the feet so you need a…
3 heights of Tilt Feet to angle the keyboard. Its like a vertikal mouse but for keyboards. Your fingers wont hurt while gaming. The image are the 24mm ones :)
This solid model was derived from Keychron’s Open Source Designs files and is intended as a printable shape tester for the Keychron M6 mouse. The printable outer solid STL was generated to the body shape of the mouse before buying it. The…
This is the inner foot for the K8. The model itself should be dimensionally accurate, but I had to print mine at ~95% scale to get it to fit without breaking For outer foot see:
I found the part of the keyboard furthest from my wrist too low, so I created these feet sleeves to go over the feet and give a little more lift to the far side of the keyboard Category: Office
I added an OLED module to my Keychron Q6. Since it is using QMK, it is easy to customize it. I added a guide as a PDF that should have all the necessary information to build one yourself.
CherryMX keys for the Keychron V5C1 top row. Sleep Mute Snip Task Manager
Print the foot out of TPU unless you have a very sticky desk mat. Uses 10 M3x8 screws to hold it all together. I suggest tapping the holes in the inner chassis. Models are pre split, just pop them apart in your slicer. Prints extremely…
The Keychron Q6 does not have integrated feets to angle the keyboard. This model solves it. Print 2 of it, one for each side. The angle is 6.4 degree, meaning the back is raised about 1 cm. This model was inspired by this model:…
I printed with DevilDesign Petg but you can use almost any material. Also printed in standing orientation with support for the upper claw.
For my Keychron K2 i needed a under desk mount which is artisan keycap friendly I saw the work from seb but it was in a wrong size, so I opened up Fusion and rebuild it from scratch based on his idea. I changed the measurements, give it a…
Cover for the K12 keyboard No Supports Needed Material: doesn't matter. I printed with PLA+
Made with BIT - https://github.com/dppdppd/The-Boardgame-Insert-Toolkit
In case you find yourself needing to adapt a Festool Adjustment Wheel # 462621 to a Keychron knob. Or anything else really. Separated into two parts because there is a small flange in the middle, and I don't actually need a functional part.
Hi! Recently I've bought a keychron wireless keyboard and I needed some way to keep charging cable out of the desk. One model is blank, another one is with Keychron logo (added .3mf for this file) Both models need two 5x2 [mm] magnets,…
A very basic replacement but it does its job properly with a fairly quick print resulting in a strong piece. This replacement does not have two positions like the original as the lower position seemed too small to me. It fits snugly, if…
I utilized a portion of BradleyM1's Keychron Knob Riser to make a standalone 15mm tall knob, for my Keychron K17 Max. It fits other keyboard models with a 6mm diameter stem. Top of knob sits about 16.6mm from top of case, a few mm higher…
Remix of the OEM cap generator. Credit goes to DesignersMind. If you have a 65% of 75% keyboard, then you'll know how difficult it is to find a cheap keycap set with 1.75u shift key. I've included their original file and a file that I've…
I tried a few other tenting kits and mashed together the things I liked about them into a single model then made some mods. I took the general design of this model:…
This 3D-printed mount is designed to securely hold the Keychron K2 keyboard under a desk, providing a convenient storage solution that frees up desk space while keeping the keyboard within easy reach. I designed this mount to address the…
This is a low profile keycap set for the Keychron K8 (Pro) or other MX style keyboards with the NEO2 layout. The file provided is a Prusa Slicer Multi-Plate Project for the MMU3 and ideally printed with a 0.2mm nozzle. I didn't include…
Just a slide on case for protecting key switch while in the bag designed by OngXeno(https://www.thingiverse.com/thing:4298507). This case is design for Keychron K2 Aluminum Frame version. It need the aluminum rail to lock onto the…
Fingertip Mouse Mod – Optimized for FDM Printing Since FDM printers are most common, this print takes layer orientation into consideration and uses a slot-channel system for the main clicks to prevent any layer weaknesses which inherently…
The Keychron K2 HE (special edition) has wood trims on the sides. I want to create storage space for the USB dongle, this is step 1; recreating the trims. Edited on Jan 22 after feedback from Drazor; my models were 127 mm long, whereas…
A small case for all the essential keyboard tools, like a keycappuller, keypuller and some spare switches or keycaps.
A smartphone holder for the Keychron V1 and V2
I made this for my Keychron K8, but I'm pretty sure you could use it for any other similar keyboards. Add adhesive foam pads on the bottom to add friction and adjust the rest to your ideal height.
a simple cool looking knurled knob that i made for my Keychron Q15 as the first CAD project. hole diameters are 6 mm and 4.8 mm, don't know about other rotary encoders tho, but maybe compatible with others (?) printing recommendations ≤…
This is a remix of @PaulGrimes_855599 's tenting base for the Keychron Q11 split keyboard. This design is set up for Keychron's own wooden palm rest but it should work fine with many others too. Some problems I had with the original and…
Mount your Ipad to the Keychron K6.The adapters are standing on the ground for more stability. Angle of the keyboard is a little steeper with this setup. Should work with all newer iPads. Hardware Keyboard Ipad Ipad Case transparent PETG…
I designed a Keyboard Cover for the Keychron V1 (75%) Keyboard fr portable use. It can be used without any magnets, but there are inserts for 6mm x 2mm magnets in-case you have those available and want to use them to make sure there is a…
Keychron K6 keyboard mount for the IKEA Skadis pegboard. The revised version of the model (v2) fits more tightly to the skadis pegboard and therefore wobbles less.
Needed some kind of mount to use my CarThing with keyboard, had to create one since there weren't any that fit my K4. Some basic supports for the “slit” needed, otherwise pretty straightforward print. Used some double sided tape to fix…
A palm rest for the K8 Pro keyboard. It's supposed to be used in the raised position when the feet of the keyboard are extended. Two versions are included: - A single STL if you have printer with a large build volume: K8 Pro palm rest -…
This key prevents accidental pressing of the light key. The key was designed for low-profile Key-switch Version. I am using the K3 model.
NackHabitat #0087 - Keychron Q8 Max Wrist Wrest For printing whole or dovetail yourself: Part A - 0087pAv1_Keychron Q8 Max Wrist Rest, Whole (3.6.2025) For printing in halves, pre-dovetailed: Part B - 0087pBv1_Keychron Q8 Max Wrist Rest,…
I wanted to create a unique volume knob for my DualShot-capped keyboard, and this is my very first design from scratch! The pieces were printed using an Ender 3 with standard settings from Cura. It consists of two parts: the "Joystick"…
I made this design to attach my streamdeck to my keychron K4. I don't know what other keyboards it will be compatible with. Make sure to print it upside down.
I made this block to make my Keychron M4 more comfortable. The mouse is very narrow and it is uncomfortable for me. My pinky also rubs on the mousepad during use. This block fixes both of those issues. Parts list: 1mm thick VHB tape Grip…
Remixed an awesome coffee cup keycap to be a two peice volume knob! Printed with an Ender 3 & remixed in blender. Category: 3D Printing
Remix of this: https://www.printables.com/model/489009-hsw-rk61-keyboard-holder Intended for the Keychron K4, but no reason other keyboards won't also fit if the width was the same/very similar. Both side pegs are identical so you'd need…
I have recreated side frames for Keychron K2 HE Special Edition keyboard basing on wooden ones that came with keyboard. Made it mainly to change keyboard look, as I have replaced stock keycaps and got an idea that it will look great with…
Foots for the Keychron K1 keyboard with a built-in USB hub. Used parts: Board from ORICO USB Clip Hub 4 Ports Threaded heat inserts M3x4x5 Countersunk head screw M3x7 USB Type-C soldering adapter with screw mount Print Settings Printer…
Simple clip-on keyboard feet for the Keychron K1. It raises the back 13mm off the table surface. It's thin enough to fit between the two switches above the F1 keys. There's also a tab on the back to allow easier removal, since you can't…
I wanted a single case so made one inspired by the existing I could find. I think it is only printable on an XL. For durability printed in PETG (transparant in my case) Print in upright position.
I couldn't find any covers to use to transport my keyboard between home and work, so I modelled my own. Uploading for others who might have the same problem. Model in four parts: Each keyboard has two halves, and the parts for the right…
This thing - selfmade hotswap socket for handwiring keyboard on Gateron or Ketchron low profile switches. Support for optional RGB led (SK2812 mini) installation. I am used it for make Corne v3 - based Cornedion…
I designed this compact storage box to keep all the small accessories that come with the Keychron keyboard—like keycap pullers, spare switches, and cables—safe and organized. The box features dedicated compartments for each item and a…
I wanted a clean way to place my phone while i'm sitting at my computer and came up with this. I started with the short version to keep the phone horizontal but then I decided I wanted to be able to keep it vertical as well. So I added…
Designed some media buttons to print for my low profile numpad
Cover for a Keychron K8 Pro keyboard. Prints as a left and right half that slide together to completely surround and protect the keyboard.
V2: Passthrough design so the SpaceMouse has grip directly on the desk, no need to add anti-slip pad to the 3Deck. V1: No passthrough, the SpaceMouse sits directly on the 3Deck, you have to add anti-slip pads under the 3Deck so it doesn't…
Holds easy my S24 Ultra I think it should also work with other versions of the Q and V series. There may be issues with some keycaps. It works perfectly with mine but they aren't the original from Keychron. printed with PLA and PETG,…
I didn't like the wood finish on my Keychron K2 HE so i decided to model my own. I added fuzzy texture to mine and it looks pretty cool. Printing on the powder coat sheet leaves a nice finish on matte PLA. I printed mine in PLA with 3…
A few days ago I got my new Keychron K10 HE keyboard. The accessories were packed in some poor plastic bags and so I searched for a nice box to keep them all together. Inspired by the “ Keychron K10 Pro Keyboard Accessoires Box with Lid ”…
A convenient way to transport your Keychron V1 Max mechanical keyboard. TPU gasket is incorporated within the model to provide some resistance to liquid and other exposures. TPU liner rests against the frame of the keyboard so that the…
Case with the cover and attachable wrist rest for the Keychron K5 Max keyboard. Model is parametrized and customizable even for different models. Initial idea emerged because the keyboard does not have any option to attach wrist rest, so…
An original model for a solid keyboard cover with a snug fit around the frame with good clearance for the keys and knob. Can double as an oversized palm rest when not in use. Instructions Each half slides on from the side of the keyboard…
A 2-Part palm wrest for the Keychron K10 V2 (Non-aluminium frame version). Forgot to order a palm wrest, and shipping took 5 years so decided to print one instead. Works surprisingly well - printed at .25mm as I like the texture, but…
Remixed design originally made by LDAlbert (Thingiverse) but modified to fit a Keychron K5 V2/ K5 Pro / K5 Max - I'm using a K5 Pro but the V2 and Max should be no different. I've closed the holes on the top part of the mount to increase…
IMPORTANT UPDATE Keychron has open-sourced their design files, you can get the model from their repository; https://github.com/Keychron/Keychron-Keyboards-Hardware-Design So you want a Keychron K8 Pro or Max in a color of your choice?…
I remixed the design so it can fit the V1 keyboards as I could not find and design for it out there and I added grip along the side for your thumb as that is what I prefer for gaming etc Note: if you need any changes is sizes let me know…
I modified the original slim keycaps for the Keychron keyboard and added pictograms to them Ins, Windows, Copilot.
description the keychron q11 keyboard comes with a ~2.8 degree positive tilt and can be purchased with matching wrist rests. i switched to this keyboard from a 0 degree tilt keyboard and could really feel the difference, and didn't like…
I wanted to use my Keychron Q0 Max as a wireless macroboard for my simracing rig so I made a holder for a 4040 aluminium profile with a 8 nut. You'll need 2 or 4 M8x16 countersunk screws and matching T-nuts.
I wanted my Keychron Q0 to be angled and be at the same height as my K8 Pro with the taller kickstands up. This case does that. Also provides a convenient way to affix it to my desk so does not move.
Remixed from @derekyle_481832. These are feet that attach to the bottom of the keychron Q6 max (and maybe other models) to give it a bit of lift. I really liked the original but it was too steep for MOA keycaps. Requires 4 M3x25mm socket…
Ignore the dust please! Of all the keyboards I have tried I like the Keychron K1X with Gateron KS-33 Banana switches best. There is one bad thing about this keyboard. If you use a desk mat then the fold-out feet will catch and fold…
Print it just like the Moonlander one. I only included the keyboard trays since that and the stand were the only things I remixed. Use the original Moonlander baseplates for these they work just fine. This one however doesn't require…
Attention when adapting to your own keyboard: Measure the front and back rims, but if your keyboard has this button part, make sure to account for that. Print a test piece for the fit! This can be something like 20mm. The print for a…
Behold, a keyboard case for transport. Designed specifically for Keyboard V3 Max. It uses 4 magnets to keep the two separate parts attached during transport. Case is broken down into two parts, both have to be printed. Print with the…
A simple dummy key to fill the gap left by an unnecessary key on my Keychron V1 Max. The attached F3D is parametric so you can fine tune the size.
Stand designed for the Keychron V1 and the Keychron wooden palm rest. Probably also fits other keyboards with similar shape (the angle at which the keyboard sits might change).
A under desk holder to keep the Keychron K0 Max from taking up desk space. Included holes for screws if you don't want to use VBH tape or if you wanted to add embedded magnets to hold it up. Printed using a Bambu A1 and Orca Slicer.…
I bought the low profile because it was cheaper but it was weird to put it next to my Keychron K8 Pro because it was too low. So I made this stand. I recommend printing with TPU for the first layer or 2 and then PETG (because without beam…
This model is extremely simple print that you can attach to your Keychron K5 aluminium keyboard with just friction push-in in order to make the it raised a little bit higher. Fusion 360 and STEP files available if you want to customize if…
Bottom row only, alt/ctrl,space/fn/windows. print face down, add modifiers, use 0.2mm nozzle for detailed markings
I’m left-handed and run my numpad on the left side of my keyboard. I am probably the only person who likes it that way, which is fine. When I recently decided to upgrade to a Keychron mechanical keyboard setup, I chose the Keychron Q3 Max…
This is a remix of the original Keychron K10 Wrist Ramp : What was changed The original model is a single large part that does not fit on smaller print beds. This remix solves that by: Splitting the wrist ramp into two printable halves…
Decided to make feet for my keychron q1, should work with other keychron Q -series keyboards. The feet are bolted onto the m3 bolt holes present on Q -series keyboards. Original m3 bolts are too short to work with the feet so you need a…
This KeyChron replacement Knob is a perfect fit if printed on a well tuned machine. If your printer is a little sloppy you might need to scale it up slightly. I print these top down but you can certainly flip it and print with supports if…
3 heights of Tilt Feet to angle the keyboard. Its like a vertikal mouse but for keyboards. Your fingers wont hurt while gaming. The image are the 24mm ones :)
Keychron M6 is a great mouse, but it's a bit too small for my hand. my pinky finger can't rest on the mouse as there is no space left. So i created this design based on the 2d sketch in the manual book. This still need some minor…
The tent files comes from https://makerworld.com/en/models/864233-keychron-q11-snap-fit-tenting-system Print the rubber feet with tpu and stick on with double sided tape. You may reduce the height of the feet as you like.
This solid model was derived from Keychron’s Open Source Designs files and is intended as a printable shape tester for the Keychron M6 mouse. The printable outer solid STL was generated to the body shape of the mouse before buying it. The…
![Cable magnetic management for Keychron keyboard (⌀4 [mm] cable)](https://media.printables.com/media/prints/1077195/images/8148699_620475d2-116b-4978-82f7-16d1fbe6e237_ad905f0d-1bc5-4431-bf16-cd861d319f2d/20241117_181942.jpg)
