1 / 6
Keychron V1 Max Travel Cover Secure Fit — zdjęcie 1
1 / 6

Keychron V1 Max Travel Cover Secure Fit

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A solid cover with a snug fit to protect your Keychron V1 Max while traveling. No supports required. Magnets optional.

Ocena
5 / 5
Polubienia
3
Pobrania
26
Wydruki
1
Wyświetlenia
136
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Computers
Licencja
Creative Commons — Attribution — Noncommercial

An original model for a solid keyboard cover with a snug fit around the frame with good clearance for the keys and knob. Can double as an oversized palm rest when not in use.

Instructions

  • Each half slides on from the side of the keyboard and push firmly into place.

  • Pull apart from bottom edges to remove from keyboard. Blocks & notches added to help with removal.

  • Press-fit 6x3mm magnet holes are included, but not required.

  • No supports required. Files are already oriented properly, with endcaps flat on the print plate.

  • PETG recommended to withstand shock, but should work fine with PLA.

  • No brim required for PETG.

My Print
  • Printer: Prusa CORE ONE with stock HF 0.4mm brass nozzle

  • Filament: Polymaker Polylite PETG Dark Blue

    • Filament Profile: Generic PETG (250 Nozzle/85 Plate)

  • Settings: 15% gyroid infill, 3 perimeters, 5 top & bottom shells, Enabled infill combination, No brim

  • Filament used: 299.25g, 97.96m

  • Print time: 7hrs 21 min

  • Note: I accidentally added a color change that created a ridge in the last 3mm. That has been removed to make the model a single color.

Notes
  • Tested in Prusa CORE One and Prusa MINI

  • After doing some tests, I found 2mm shell thickness too flexy. Increased to 3mm.

  • Added diamond pattern inside to increase stiffness. Interior still clears keys and knob fine.

  • Adjusted clearance for top and bottom cleats for a more snug fit.

  • Added a few notches and blocks to help fingers get purchase to pull the thing apart.

Tagi