Keychron V1 Max Travel Cover Secure Fit
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A solid cover with a snug fit to protect your Keychron V1 Max while traveling. No supports required. Magnets optional.
- Rating
- 5 / 5
- Likes
- 3
- Downloads
- 26
- Makes
- 1
- Views
- 136
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial
An original model for a solid keyboard cover with a snug fit around the frame with good clearance for the keys and knob. Can double as an oversized palm rest when not in use.
Instructions
Each half slides on from the side of the keyboard and push firmly into place.
Pull apart from bottom edges to remove from keyboard. Blocks & notches added to help with removal.
Press-fit 6x3mm magnet holes are included, but not required.
No supports required. Files are already oriented properly, with endcaps flat on the print plate.
PETG recommended to withstand shock, but should work fine with PLA.
No brim required for PETG.
My Print
Printer: Prusa CORE ONE with stock HF 0.4mm brass nozzle
Filament: Polymaker Polylite PETG Dark Blue
Filament Profile: Generic PETG (250 Nozzle/85 Plate)
Settings: 15% gyroid infill, 3 perimeters, 5 top & bottom shells, Enabled infill combination, No brim
Filament used: 299.25g, 97.96m
Print time: 7hrs 21 min
Note: I accidentally added a color change that created a ridge in the last 3mm. That has been removed to make the model a single color.
Notes
Tested in Prusa CORE One and Prusa MINI
After doing some tests, I found 2mm shell thickness too flexy. Increased to 3mm.
Added diamond pattern inside to increase stiffness. Interior still clears keys and knob fine.
Adjusted clearance for top and bottom cleats for a more snug fit.
Added a few notches and blocks to help fingers get purchase to pull the thing apart.