Keychron K0 Max Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
To match the height of the K8 Pro
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 130
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
I bought the low profile because it was cheaper but it was weird to put it next to my Keychron K8 Pro because it was too low. So I made this stand.
I recommend printing with TPU for the first layer or 2 and then PETG (because without beam intelocking TPU won't bond with PLA). Make sure that the bottom solid layers are at least 2 (so that TPU would bond to a solid PETG layer, it won't bond strong enough to only infill and the TPU layer would just peal off).
I made sure to include a slot for the USB dongle. I optimized it so it holds well but still easy enough to pull it out (took 4 prototypes for that part alone 😋).
if you download from OnShape the license is Public Domain but attribution would still be nice 😊