Keychron Q11 Keyboard Cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Split cover for left and right half, open at the bottom, with a lip between the two halves.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 138
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I couldn't find any covers to use to transport my keyboard between home and work, so I modelled my own. Uploading for others who might have the same problem.
Model in four parts: Each keyboard has two halves, and the parts for the right cover are slightly larger than the left - so they are not interchangable.
I've tested the print in 95A TPU, 0.4 nozzle, 0.2 layer height, 20% infill. It should still fit using harder plastics. Designed to fit in a Bambu Lab A1 mini print volume
----------------------------
This is just a V1: V2 would probably enclose the base, and add some kind of catch to the lip interface to keep it closed.