Keychron M4 pinky block support
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A block for the Keychron M4 mouse which widens your grip and prevents the pinky finger from rubbing on the mousepad.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 470
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Public Domain
I made this block to make my Keychron M4 more comfortable. The mouse is very narrow and it is uncomfortable for me. My pinky also rubs on the mousepad during use. This block fixes both of those issues.
Parts list:
- 1mm thick VHB tape
- Grip tape OPTIONAL
- Dot skate OPTIONAL
Assembly
1) Print one of the blocks (I use the 5mm one) and the grip tape guide if you are going to be using grip tape.
2) Put the VHB tape on the back side
3) Cut off the rest of the tape
4) Cut out a piece of the grip tape using the guide OPTIONAL
5) Stick on the grip tape OPTIONAL
6) Stick on the block
7) Stick on a skate dot (dont forget to remove the foil from it) OPTIONAL
8) Let me know how you like it ;-)
Print settings:
I included a .3mf file with my preferred print setting. It doesnt need to be strong at all, so you want to minimize the weight:
layer height: 0,12mm
wall loops: 1
top/bottom layers: 3
infill: 3% rectilinear without anchoring