1 / 7
Keychron Q11 Keyboard and Wrist Rest Zero-Tilt Carriage — zdjęcie 1
1 / 7

Keychron Q11 Keyboard and Wrist Rest Zero-Tilt Carriage

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Carriage for Keychron Q11 keyboard to fix tilt to 0 degrees and keep wrist rests attached to rest of keyboard.

Ocena
0 / 5
Polubienia
7
Pobrania
44
Wydruki
1
Wyświetlenia
281
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Computers
Licencja
Creative Commons — Public Domain

description

the keychron q11 keyboard comes with a ~2.8 degree positive tilt and can be purchased with matching wrist rests. i switched to this keyboard from a 0 degree tilt keyboard and could really feel the difference, and didn't like that i needed to move the wrist rests around separate from the keyboard. i wanted to level out the keyboard to 0 degrees, and to “attach” the wrist rests in some way. i didn't see anything online for this setup, so i went ahead and modeled it out.

the wrist rests were still pretty low when even with the leveled keyboard, so i raised it up by 6mm. this was a fairly arbitrary height choice, but it puts the wrist rest height about even with the bottom of the keys and feels a lot better. i also flipped the rests so that the thicker part is closer to my body than the thin part. that helped fix the “typing uphill” feeling that i experienced otherwise. i may raise them up further in a future version, since this feature technically still has a positive tilt.

to keep the finished build from sliding around your desk, you'll want to add something grippy to the back. i recommend a sheet of adhesive cork.

build instructions

nothing specific really. I printed with PLA and 15% infill and it's really solid.

possible future changes

  • raise wrist rest height to achieve true zero degrees

  • create template for cutting/mounting adhesive cork layer

  • introduce tenting

changelog

v6

added a bit more room for the keyboard in the recessed area. it functionally fit in v5, but one of the walls had to flex to accommodate the keyboard. now it doesn't have to flex!

Tagi