Keychron Q8 Max Wrist Wrest
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple wrist rest for the Keychron Q8 Max wireless keyboard.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 47
- Wydruki
- 0
- Wyświetlenia
- 197
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
NackHabitat #0087 - Keychron Q8 Max Wrist Wrest
For printing whole or dovetail yourself:
- Part A - 0087pAv1_Keychron Q8 Max Wrist Rest, Whole (3.6.2025)
For printing in halves, pre-dovetailed:
- Part B - 0087pBv1_Keychron Q8 Max Wrist Rest, Left (3.6.2025)
- Parc C - 0087pCv1_Keychron Q8 Max Wrist Rest, Right (3.6.2025)
This was a super quick design and print in a single day using a little photogrammetry and a couple of guesses on measurements. All things considered I think it's pretty solid!
I've uploaded the .STEP of both the whole and the pre-dovetailed in case you wanted to tweak it at all. I made the dovetail a little on the loose side but it could be glued if you wanted. I've kept it not-glued and it's been great so far. Printed with Polychroma Celestial Purple which I think has a nice texture at .16mm.
If you want to dovetail yourself, use the whole version. If you just want to print in halves, just use the .3mf I uploaded.
Use either of these for the underside so it doesn't slip around easy. [affiliate links]
- Non Slip Self Adhesive Silicone Cuttable Furniture Pads 4x40 inch
- Clear Adhesive Bumper Pads Combo Pack
OPTIONAL
- Polymaker Panchroma Celestial Purple
- Bob Smith Industries Maxi-Cure CA Glue