Mini Wrist Slingshot (Print-in-Place)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This print in place little brother of my full size wrist slingshot is easy to make and fun to play with!
- Ocena
- 5 / 5
- Polubienia
- 145
- Pobrania
- 180
- Wydruki
- 2
- Wyświetlenia
- 2001
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Little brother to my earlier Wrist Slingshot that prints in place. It also has a little lidded compartment to either store 9 projectiles (if you print the ones provided) or the slingshot cradle.
You can also print an optional little hook that you can use to wrap the slingshot elastic band when not in use.
Printing and assembling
To assemble, you need a rubber band or two and velcro strap. I recommend using glue or two sided tape to fasten the velcro strap to the slingshot so it doesn't slide around when shooting.
Two different cradles are provided: Cradle A for any size projectile and Cradle B for using only the provided projectiles you can print. The cradles are meant to be printed in TPU. If you can't print TPU, you can print one in whatever material and use it as a template to cut a piece of fabric or for example a strong trash bag. Or just eyeball it.
Optional Band Hook is available to print to wrap the elastic band away when not in use. Just attach it in a proper position along the velcro strap according to the length of the elastic band.
